PIC24HJ64GP502-E/MM Microchip Technology, PIC24HJ64GP502-E/MM Datasheet - Page 63

• Manufacturer Part Number: PIC24HJ64GP502-E/MM
• Description: IC PIC MCU FLASH 64K 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ64GP502-E/MM

• Program Memory Type: FLASH
• Program Memory Size: 64KB (22K x 24)
• Package / Case: 28-QFN
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM300027
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10-ch x 10-bit or 10-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

FIGURE 6-2:
© 2009 Microchip Technology Inc.
Oscillator Clock
Device Status
Note 1: POR: A POR circuit holds the device in Reset when the power supply is turned on. The POR circuit is active
SYSRST
FSCM
POR
BOR
V
DD
2: BOR: The on-chip voltage regulator has a BOR circuit that keeps the device in Reset until V
3: PWRT Timer: The programmable power-up timer continues to hold the processor in Reset for a specific
4: Oscillator Delay: The total delay for the clock to be ready for various clock source selections are given in
5: When the oscillator clock is ready, the processor begins execution from location 0x000000. The user
6: The Fail-safe clock monitor (FSCM), if enabled, begins to monitor the system clock when the system clock is
until V
V
becomes stable.
period of time (T
at the appropriate level for full-speed operation. After the delay T
inactive, which in turn enables the selected oscillator to start generating clock cycles.
Table 6-1. Refer to Section 9.0 “Oscillator Configuration” for more information.
application programs a GOTO instruction at the reset address, which redirects program execution to the
appropriate start-up routine.
ready and the delay T
BOR
1
SYSTEM RESET TIMING
DD
threshold and the delay T
crosses the V
2
T
PWRT
V
POR
POR
) after a BOR. The delay T
FSCM
POR
elapsed.
threshold and the delay T
BOR
Preliminary
Vbor
V
BOR
has elapsed. The delay T
T
PWRT
T
3
BOR
Reset
Time
PWRT
ensures that the system power supplies have stabilized
POR
T
OSCD
has elapsed.
BOR
PWRT
T
OST
ensures the voltage regulator output
4
has elapsed, the SYSRST becomes
T
LOCK
DS70293D-page 63
5
DD
6
Run
crosses the
T
FSCM