PIC24HJ64GP502-E/MM Microchip Technology, PIC24HJ64GP502-E/MM Datasheet - Page 343

• Manufacturer Part Number: PIC24HJ64GP502-E/MM
• Description: IC PIC MCU FLASH 64K 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ64GP502-E/MM

• Program Memory Type: FLASH
• Program Memory Size: 64KB (22K x 24)
• Package / Case: 28-QFN
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM300027
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10-ch x 10-bit or 10-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

APPENDIX A:
Revision A (September 2007)
Initial release of this document.
Revision B (March 2008)
This revision includes minor typographical and
formatting changes throughout the data sheet text. In
addition, redundant information was removed that is
now available in the respective chapters of the
dsPIC33F/PIC24H Family Reference Manual, which
can
(www.microchip.com).
The major changes are referenced by their respective
section in the following table.
TABLE A-1:
© 2009 Microchip Technology Inc.
“High-Performance, 16-bit Microcontrollers” Note 1 added to all pin diagrams (see “Pin Diagrams”)
Section 1.0 “Device Overview”
Section 6.0 “Interrupt Controller”
Section 7.0 “Direct Memory Access (DMA)”
Section 8.0 “Oscillator Configuration”
Section 19.0 “10-bit/12-bit Analog-to-Digital
Converter (ADC1)”
Section 24.0 “Special Features”
be
obtained
Section Name
MAJOR SECTION UPDATES
from
REVISION HISTORY
the
Microchip
website
Updated the “PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 and
PIC24HJ128GPX02/X04 Controller Families” table as follows:
• PIC24HJ128GP804 changed to PIC24HJ128GP504
• PIC24HJ128GP804 changed to PIC24HJ128GP504
• Added new column: External Interrupts
• Added Note 3
Updated parameters PMA0, PMA1 and PMD0 through PMPD7
(Table 1-1)
IFS0-IFSO4 changed to IFS
IEC0-IEC4 changed to IEC
IPC0-IPC19 changed to IPCx (see Section 6.3.4 “IPCx”)
Updated parameter PMP (see Table 7-1)
Updated the third clock source item (External Clock) in
Section 8.1.1 “System Clock Sources”
Updated TUN<5:0> (OSCTUN<5:0>) bit description (see
Register 8-4)
Added Note 2 to Figure 19-3
Added Note 2 to Figure 24-1
Added Note after second paragraph in Section 24.2 “On-Chip
Voltage Regulator”
Preliminary
Update Description
X
X
(see Section 6.3.3 “IECx”)
(see Section 6.3.2 “IFSx”)
DS70293D-page 343