PIC24HJ64GP502-E/MM Microchip Technology, PIC24HJ64GP502-E/MM Datasheet - Page 345

• Manufacturer Part Number: PIC24HJ64GP502-E/MM
• Description: IC PIC MCU FLASH 64K 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ64GP502-E/MM

• Program Memory Type: FLASH
• Program Memory Size: 64KB (22K x 24)
• Package / Case: 28-QFN
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM300027
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10-ch x 10-bit or 10-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Revision C (May 2009)
This revision includes minor typographical and
formatting changes throughout the data sheet text.
Global changes include:
• Changed all instances of OSCI to OSC1 and
• Changed all instances of V
The other changes are referenced by their respective
section in the following table.
TABLE A-2:
© 2009 Microchip Technology Inc.
“High-Performance, 16-bit
Microcontrollers”
Section 1.0 “Device Overview”
Section 2.0 “Guidelines for Getting
Started with 16-bit Microcontrollers”
Section 3.0 “CPU”
Section 4.0 “Memory Organization”
Section 5.0 “Flash Program Memory” Updated Section 5.3 “Programming Operations” with programming
Section 9.0 “Oscillator Configuration” Updated the Oscillator System Diagram and added Note 2 (see
OSCO to OSC2
V
CAP
to V
CAP
Section Name
/V
DDCORE
MAJOR SECTION UPDATES
DDCORE
and V
Updated all pin diagrams to denote the pin voltage tolerance (see “Pin
Diagrams”).
Added Note 2 to the 28-Pin QFN-S and 44-Pin QFN pin diagrams, which
references pin connections to V
Updated AV
Added new section to the data sheet that provides guidelines on getting
started with 16-bit Digital Signal Controllers.
Added Peripheral Pin Select (PPS) capability column to Pinout I/O
Descriptions (see Table 1-1).
Updated CPU Core Block Diagram with a connection from the DSP
Engine to the Y Data Bus (see Figure 3-1).
Updated Reset value for CORCON in the CPU Core Register Map (see
Table 4-1).
Updated Reset value for IPC15 in the Interrupt Controller Register Map
(see Table 4-4).
Removed the FLTA1IE bit (IEC3) from the Interrupt Controller Register
Map (see Table 4-4).
Updated bit locations for RPINR25 in the Peripheral Pin Select Input
Register Map (see Table 4-19).
Updated the Reset value for CLKDIV in the System Control Register Map
(see Table 4-31).
time formula.
Figure 9-1).
Updated default bit values for DOZE<2:0> and FRCDIV<2:0> in the Clock
Divisor (CLKDIV) Register (see Register 9-2).
Added a paragraph regarding FRC accuracy at the end of Section 9.1.1
“System Clock Sources”.
Added Note 3 to Section 9.2.2 “Oscillator Switching Sequence”.
Added Note 1 to the FRC Oscillator Tuning (OSCTUN) Register (see
Register 9-4).
DDCORE
Preliminary
/
DD
in the PINOUT I/O Descriptions (see Table 1-1).
Update Description
SS
.
DS70293D-page 345