AT91SAM7XC512-CU Atmel, AT91SAM7XC512-CU Datasheet - Page 144

• Manufacturer Part Number: AT91SAM7XC512-CU
• Description: MCU ARM 512K HS FLASH 100-TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7XC512-CU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: CAN, Ethernet, I²C, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 62
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFBGA
• Processor Series: AT91SAMx
• Core: ARM7TDMI
• Data Bus Width: 32 bit
• Data Ram Size: 128 KB
• Interface Type: MII, SPI, TWI
• Maximum Clock Frequency: 55 MHz
• Number Of Programmable I/os: 62
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, KSK-AT91SAM7X-PL, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM7XC-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9AT91SAM7XC-EK - KIT EVAL FOR AT91SAM7XC256/128
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

20.3.2
Register Name:
Access Type:
Offset: (EFC0)
Offset: (EFC1)
• FCMD: Flash Command
This field defines the Flash commands:
144
31
23
15
–
7
–
AT91SAM7XC512/256/128 Preliminary
MC Flash Command Register
Others
FCMD
0000
0001
0010
0011
0100
1000
1011
1101
1111
30
22
14
MC_FCR
Write-only
0x64
0x74
–
6
–
Operations
No command.
Does not raise the Programming Error Status flag in the Flash Status Register MC_FSR.
Write Page Command (WP):
Starts the programming of the page specified in the PAGEN field.
Set Lock Bit Command (SLB):
Starts a set lock bit sequence of the lock region specified in the PAGEN field.
Write Page and Lock Command (WPL):
The lock sequence of the lock region associated with the page specified in the field PAGEN
occurs automatically after completion of the programming sequence.
Clear Lock Bit Command (CLB):
Starts a clear lock bit sequence of the lock region specified in the PAGEN field.
Erase All Command (EA):
Starts the erase of the entire Flash.
If at least one page is locked, the command is cancelled.
Set General-purpose NVM Bit (SGPB):
Activates the general-purpose NVM bit corresponding to the number specified in the PAGEN
field.
Clear General Purpose NVM Bit (CGPB):
Deactivates the general-purpose NVM bit corresponding to the number specified in the
PAGEN field.
Set Security Bit Command (SSB):
Sets security bit.
Reserved.
Raises the Programming Error Status flag in the Flash Status Register MC_FSR.
29
21
13
–
5
–
28
20
12
–
4
–
PAGEN
KEY
27
19
11
–
3
26
18
10
–
2
FCMD
25
17
9
1
6209F–ATARM–17-Feb-09
PAGEN
24
16
8
0