AT91SAM9M10-CU Atmel, AT91SAM9M10-CU Datasheet - Page 131

• Manufacturer Part Number: AT91SAM9M10-CU
• Description: IC MCU 16/32BIT ARM9 324TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9M10-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 400MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: ROM
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 0.9 V ~ 1.1 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 324-TFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: 2-Wire, SPI, USART
• Maximum Clock Frequency: 133 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 2 x 16 bit
• Operating Supply Voltage: 1.65 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9M10-G45-EK
• Controller Family/series: AT91
• No. Of I/o's: 160
• Ram Memory Size: 64KB
• Cpu Speed: 400MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• Cpu Family: AT91
• Device Core: ARM926EJ-S
• Device Core Size: 32b
• Frequency (max): 400MHz
• Total Internal Ram Size: 64KB
• # I/os (max): 160
• Number Of Timers - General Purpose: 7
• Operating Supply Voltage (typ): 1.8/2.5/3.3V
• Operating Supply Voltage (max): 1.1/1.95/3.6V
• Operating Supply Voltage (min): 0.9/1.65/1.8/3V
• On-chip Adc: 8-chx10-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 324
• Package Type: TFBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

19. Bus Matrix (MATRIX)
19.1
19.2
19.2.1
6355B–ATARM–21-Jun-10
Description
Embedded Characteristics
Matrix Masters
The Bus Matrix implements a multi-layer AHB, based on the AHB-Lite protocol, that enables par-
allel access paths between multiple AHB masters and slaves in a system, thus increasing the
overall bandwidth. The Bus Matrix interconnects up to 16 AHB masters to up to 16 AHB slaves.
The normal latency to connect a master to a slave is one cycle except for the default master of
the accessed slave which is connected directly (zero cycle latency).
The Bus Matrix user interface is compliant with ARM Advanced Peripheral Bus and provides a
Chip Configuration User Interface with Registers that allow the Bus Matrix to support application
specific features.
The Bus Matrix of the AT91SAM9M10 manages Masters, thus each master can perform an
access concurrently with others, depending on whether the slave it accesses is available.
Each Master has its own decoder, which can be defined specifically for each master. In order to
simplify the addressing, all the masters have the same decodings.
• 12-layer Matrix, handling requests from 11 masters
• Programmable Arbitration strategy
• Burst Management
• One Address Decoder provided per Master
• Boot Mode Select
• Remap Command
– Fixed-priority Arbitration
– Round-Robin Arbitration, either with no default master, last accessed default master
– Breaking with Slot Cycle Limit Support
– Undefined Burst Length Support
– Three different slaves may be assigned to each decoded memory area: one for
– Non-volatile Boot Memory can be internal ROM or external memory on EBI_NCS0
– Selection is made by General purpose NVM bit sampled at reset
– Allows Remapping of an Internal SRAM in Place of the Boot Non-Volatile Memory
– Allows Handling of Dynamic Exception Vectors
or fixed default master
internal ROM boot, one for internal flash boot, one after remap
(ROM or External Flash)
AT91SAM9M10
131