AT91SAM9M10-CU Atmel, AT91SAM9M10-CU Datasheet - Page 580

• Manufacturer Part Number: AT91SAM9M10-CU
• Description: IC MCU 16/32BIT ARM9 324TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9M10-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 400MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: ROM
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 0.9 V ~ 1.1 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 324-TFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: 2-Wire, SPI, USART
• Maximum Clock Frequency: 133 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 2 x 16 bit
• Operating Supply Voltage: 1.65 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9M10-G45-EK
• Controller Family/series: AT91
• No. Of I/o's: 160
• Ram Memory Size: 64KB
• Cpu Speed: 400MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• Cpu Family: AT91
• Device Core: ARM926EJ-S
• Device Core Size: 32b
• Frequency (max): 400MHz
• Total Internal Ram Size: 64KB
• # I/os (max): 160
• Number Of Timers - General Purpose: 7
• Operating Supply Voltage (typ): 1.8/2.5/3.3V
• Operating Supply Voltage (max): 1.1/1.95/3.6V
• Operating Supply Voltage (min): 0.9/1.65/1.8/3V
• On-chip Adc: 8-chx10-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 324
• Package Type: TFBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Figure 32-53. Master Node with PDC (PDCM=0)
32.7.8.24
Figure 32-54. Slave Node with PDC
6355B–ATARM–21-Jun-10
WRITE BUFFER
WRITE BUFFER
DATA N
DATA 0
IDENTIFIER
DATA N
DATA 0
|
|
|
|
|
|
|
|
Slave Node Configuration
(DMA)
PDC
In this configuration, the PDC transfers only the DATA. The Identifier must be read by the user in
the LIN Identifier register (US_LINIR). The LIN mode must be written by the user in the LIN
Mode register (US_LINMR).
The WRITE buffer contains the DATA if the USART sends the response (NACT=PUBLISH).
T h e R E A D b u f f e r c o n t a i n s t h e D A T A i f t h e U S A R T r e c e i v e s t h e r e s p o n s e
(NACT=SUBSCRIBE).
(DMA)
PDC
APB bus
TXRDY
APB bus
RXRDY
LIN CONTROLLER
NODE ACTION = PUBLISH
USART3
LIN CONTROLLER
USART3
READ BUFFER
DATA N
WRITE BUFFER
DATA 0
READ BUFFER
IDENTIFIER
|
|
|
|
DATA N
DATA 0
|
|
|
|
(DMA)
PDC
(DMA)
PDC
AT91SAM9M10
APB bus
TXRDY
RXRDY
APB bus
RXRDY
NODE ACTION = SUBSCRIBE
LIN CONTROLLER
NACT = SUBSCRIBE
USART3
LIN CONTROLLER
USART3
580