P89LV51RD2FA,512 NXP Semiconductors, P89LV51RD2FA,512 Datasheet - Page 42

• Manufacturer Part Number: P89LV51RD2FA,512
• Description: IC 80C51 MCU 1024 RAM 44PLCC
• Manufacturer: NXP Semiconductors
• Series: 89LVr

Specifications of P89LV51RD2FA,512

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 33MHz
• Connectivity: SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-PLCC
• Processor Series: P89LV5x
• Core: 80C51
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: SPI, UART
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Operating Supply Voltage: 2.4 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Minimum Operating Temperature: - 40 C
• Package: 44PLCC
• Device Core: 80C51
• Family Name: 89LV
• Maximum Speed: 40 MHz
• For Use With: 622-1017 - BOARD 44-ZIF PLCC SOCKET622-1008 - BOARD FOR LPC9103 10-HVSON
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: 935274176512; P89LV51RD2FA; P89LV51RD2FA

NXP Semiconductors
P89LV51RB2_RC2_RD2_5
Product data sheet
6.7.1 SPI features
6.7.2 SPI description
6.7 SPI
In a more complex system the following could be used to select slaves 1 and 2 while
excluding slave 0:
Example 1, slave 0:
Example 2, slave 1:
Example 3, slave 2:
In the above example the differentiation among the 3 slaves is in the lower 3 address bits.
Slave 0 requires that bit 0 = 0 and it can be uniquely addressed by 1110 0110. Slave 1
requires that bit 1 = 0 and it can be uniquely addressed by 1110 0101. Slave 2 requires
that bit 2 = 0 and its unique address is 1110 0011. To select Slaves 0 and 1 and exclude
Slave 2 use address 1110 0100, since it is necessary to make bit 2 = 1 to exclude slave 2.
The Broadcast Address for each slave is created by taking the logical OR of SADDR and
SADEN. Zeros in this result are treated as don’t-cares. In most cases, interpreting the
don’t-cares as ones, the broadcast address will be FF hexadecimal. Upon reset SADDR
and SADEN are loaded with 0s. This produces a given address of all ‘don’t cares’ as well
as a Broadcast address of all ‘don’t cares'. This effectively disables the Automatic
Addressing mode and allows the microcontroller to use standard UART drivers which do
not make use of this feature.
The SPI allows high-speed synchronous data transfer between the
P89LV51RB2/RC2/RD2 and peripheral devices or between several
P89LV51RB2/RC2/RD2 devices.
SADDR = 1100 0000
--------------------------------------------------- -
SADDR = 1110 0000
--------------------------------------------------- -
SADDR = 1100 0000
--------------------------------------------------- -
SADEN = 1111 1001
SADEN = 1111 1010
SADEN = 1111 1100
•
•
•
•
•
•
•
Given = 1100 0XX0
Given = 1110 0X0X
Given = 1100 00XX
Master or slave operation
10 MHz bit frequency (maximum)
LSB first or MSB first data transfer
Four programmable bit rates
End of transmission (SPIF)
Write collision flag protection (WCOL)
Wake-up from Idle mode (slave mode only)
Rev. 05 — 15 December 2009
Figure 16
P89LV51RB2/RC2/RD2
shows the correspondence between master
8-bit microcontrollers with 80C51 core
© NXP B.V. 2009. All rights reserved.
42 of 76
(6)
(7)
(8)