MC68HC908GP32CP Freescale Semiconductor, MC68HC908GP32CP Datasheet - Page 190

• Manufacturer Part Number: MC68HC908GP32CP
• Description: IC MCU 8MHZ 32K FLASH 40-DIP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908GP32CP

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 33
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• For Use With: M68EVB908GP32 - BOARD EVALUATION FOR HC908GP32
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Keyboard Interrupt Module (KBI)
13.8.2 Keyboard Interrupt Enable Register
Technical Data
188
Address:
ACKK — Keyboard Acknowledge Bit
IMASKK — Keyboard Interrupt Mask Bit
MODEK — Keyboard Triggering Sensitivity Bit
The keyboard interrupt enable register enables or disables each port A
pin to operate as a keyboard interrupt pin.
KBIE7–KBIE0 — Keyboard Interrupt Enable Bits
Reset:
Read:
Write:
Figure 13-4. Keyboard Interrupt Enable Register (INTKBIER)
Writing a logic 1 to this write-only bit clears the keyboard interrupt
request. ACKK always reads as logic 0. Reset clears ACKK.
Writing a logic 1 to this read/write bit prevents the output of the
keyboard interrupt mask from generating interrupt requests. Reset
clears the IMASKK bit.
This read/write bit controls the triggering sensitivity of the keyboard
interrupt pins. Reset clears MODEK.
Each of these read/write bits enables the corresponding keyboard
interrupt pin to latch interrupt requests. Reset clears the keyboard
interrupt enable register.
1 = Keyboard interrupt requests masked
0 = Keyboard interrupt requests not masked
1 = Keyboard interrupt requests on falling edges and low levels
0 = Keyboard interrupt requests on falling edges only
1 = PTAx pin enabled as keyboard interrupt pin
0 = PTAx pin not enabled as keyboard interrupt pin
$001B
KBIE7
Bit 7
0
Keyboard Interrupt Module (KBI)
KBIE6
6
0
KBIE5
5
0
KBIE4
MC68HC908GP32
4
0
KBIE3
3
0
•
KBIE2
MC68HC08GP32
2
0
KBIE1
1
0
MOTOROLA
—
KBIE0
Bit 0
Rev. 6
0