PIC16F724-E/MV Microchip Technology, PIC16F724-E/MV Datasheet - Page 89

• Manufacturer Part Number: PIC16F724-E/MV
• Description: 7KB Flash Program, 1.8V-5.5V, 16MHz Internal Oscillator, 8b ADC, CCP, I2C/SPI, A
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F724-E/MV

• Processor Series: PIC16F
• Core: PIC
• Program Memory Type: Flash
• Program Memory Size: 7 KB
• Data Ram Size: 192 B
• Interface Type: I2C, SPI, AUSART
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Package / Case: UQFN-40
• Development Tools By Supplier: MPLAB IDE Software
• Minimum Operating Temperature: - 40 C
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 36
• Eeprom Size: -
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 14x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Lead Free Status / Rohs Status: Details

7.0
7.1
The oscillator module has a wide variety of clock sources
and selection features that allow it to be used in a wide
range of applications while maximizing performance and
minimizing power consumption. Figure 7-1 illustrates a
block diagram of the oscillator module.
Clock sources can be configured from external
oscillators, quartz crystal resonators, ceramic resonators
and Resistor-Capacitor (RC) circuits. In addition, the
system can be configured to use an internal calibrated
high-frequency oscillator as clock source, with a choice
of selectable speeds via software.
FIGURE 7-1:
© 2009 Microchip Technology Inc.
Internal Oscillator
OSC2
OSC1
500 kHz
OSCILLATOR MODULE
Overview
External Oscillator
SIMPLIFIED PIC
PLL
32x
(Configuration Word 1)
PLLEN
1
0
Sleep
®
MCU CLOCK SOURCE BLOCK DIAGRAM
16 MHz/500 kHz
2 MHz/62.5 kHz
8 MHz/250 kHz
4 MHz/125 kHz
PIC16F72X/PIC16LF72X
(OSCCON Register)
IRCF<1:0>
11
10
01
00
Clock source modes are configured by the FOSC bits
in Configuration Word 1 (CONFIG1). The oscillator
module can be configured for one of eight modes of
operation.
1.
2.
3.
4.
5.
6.
7.
8.
RC – External Resistor-Capacitor (RC) with
F
RCIO – External Resistor-Capacitor (RC) with
I/O on OSC2/CLKOUT.
INTOSC – Internal oscillator with F
on OSC2 and I/O on OSC1/CLKIN.
INTOSCIO – Internal oscillator with I/O on
OSC1/CLKIN and OSC2/CLKOUT.
EC – External clock with I/O on OSC2/CLKOUT.
HS – High Gain Crystal or Ceramic Resonator
mode.
XT – Medium Gain Crystal or Ceramic
Resonator Oscillator mode.
LP – Low-Power Crystal mode.
OSC
/4 output on OSC2/CLKOUT.
LP, XT, HS, RC, EC
INTOSC
(Configuration Word 1)
FOSC<2:0>
(CPU and Peripherals)
System Clock
DS41341E-page 89
OSC
/4 output