IDT82V3285DQGT IDT, Integrated Device Technology Inc, IDT82V3285DQGT Datasheet - Page 100

• Manufacturer Part Number: IDT82V3285DQGT
• Description: IC PLL WAN STRATUM 100-TQFP
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: PLL Clock Generatorr

Specifications of IDT82V3285DQGT

• Input: CMOS, LVDS, PECL, TTL
• Output: CMOS, LVDS, PECL, TTL
• Frequency - Max: 622.08MHz
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 100-TQFP, 100-VQFP
• Frequency-max: 622.08MHz
• Function: Wan PLL
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Package Type: TQFP
• Pin Count: 100
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 82V3285DQGT

T4_INPUT_SEL_CNFG - T4 Selected Input Clock Configuration
Programming Information
IDT82V3285
Address: 51H
Type: Read / Write
Default Value: X0000000
3 - 0
Bit
7
6
5
4
7
-
T4_INPUT_SEL[3:0]
T4_TEST_T0_PH
T4_LOCK_T0
T4_LOCK_T0
T0_FOR_T4
Name
6
-
Reserved.
This bit determines whether the T4 DPLL locks to a T0 DPLL output or locks independently from the T0 DPLL.
0: Independently from the T0 path. (default)
1: Locks to a 77.76 MHz or 8 kHz signal from the T0 DPLL 77.76 MHz path.
This bit is valid only when the T4_LOCK_T0 bit (b6, 51H) is ‘1’. It determines whether a 77.76 MHz or 8 kHz signal from the
T0 DPLL 77.76 MHz path is selected by the T4 DPLL.
0: 77.76 MHz. (default)
1: 8 kHz.
This bit determines whether T4 selected input clock is compared with the feedback signal of the T4 DPLL for T4 DPLL locking
or is compared with the T0 selected input clock to get the phase difference between T0 and T4 selected input clocks.
0: The T4 DPLL output. (default)
1: The T0 selected input clock.
These bits are valid only when the T4_LOCK_T0 bit (b6, 51H) is ‘0’. They determines the T4 DPLL input clock selection.
0000: Automatic selection. (default)
0001, 0010: Reserved.
0011: Forced selection - IN1 is selected.
0100: Forced selection - IN2 is selected.
0101: Forced selection - IN3 is selected.
0110: Forced selection - IN4 is selected.
0111, 1000, 1001, 1010: Reserved.
1011: Forced selection - IN5 is selected.
1100, 1101, 1110, 1111: Reserved.
T0_FOR_T4
5
T4_TEST_T0_PH
4
100
T4_INPUT_SEL3
3
Description
T4_INPUT_SEL2
2
T4_INPUT_SEL1
1
T4_INPUT_SEL0
April 11, 2007
0
WAN PLL