PEB20534H-10V2.1 Infineon Technologies, PEB20534H-10V2.1 Datasheet - Page 205

• Manufacturer Part Number: PEB20534H-10V2.1
• Description: Communication Controller 208-Pin FQFP
• Manufacturer: Infineon Technologies

Table 29
Step
4
5
In PCI mode the MFP can be used to access external peripherals like ESCC2, HSCX,
FALC54, when LBI configuration is selected. In LBI configuration even data can be
exchanged with a local microprocessor. Moreover, a General Purpose Port (GPP) can
be used for control purposes. Alternatively, serial communication can be performed via
the SSC port.
Depending
GMODE.PERCFG), the appropriate register set of the MFP has to be initialized, too (LBI,
SSC, GPP registers).
Data Sheet
Action
Set serial mode specific features for
HDLC
Auto Mode, NRM Mode: CCR1, TIMR, XADR, RADR, RAMR
Non Auto Mode: CCR1, CCR2, RADR, RAMR
Transparent Mode: CCR1, CCR2, RADR, RAMR
Extended Transparent Mode: CCR1
Asynchronous PPP: CCR1, CCR2, UDAC, ACCM
Synchronous PPP: CCR1, CCR2, UDAC, ACCM
General:
Shared flags, CRC reset level: CCR1
Preamble, ITF/OIN, SCC RFIFO configuration: CCR2
Receive Length Check: RLCR
ASYNC
Bit clock rate: CCR0
Data format, SCC RFIFO configuration, Flow control: CCR2, XNXF
Character Insertion: TICR
Termination Character: TCR
BISYNC
Bisync/Monosync: CCR1
Sync character: SYNCR
Data format, SCC RFIFO configuration, Preamble, CRC: CCR2
Termination character: TCR
Set interrupt mask: IMR
on
Initialization of the SCC(s) (cont’d)
the
configuration
selected
205
Reset and Initialization Procedure
in
GMODE
register
PEB 20534
PEF 20534
2000-05-30
(bit
field