PEF 24470 H V1.3 Infineon Technologies, PEF 24470 H V1.3 Datasheet - Page 12

• Manufacturer Part Number: PEF 24470 H V1.3
• Description: IC MTSI-XL SWITCHING MQFP100
• Manufacturer: Infineon Technologies
• Series: SWITIr

Specifications of PEF 24470 H V1.3

• Function: Switching IC
• Interface: PCM, PLL
• Number Of Circuits: 1
• Voltage - Supply: 3.13 V ~ 3.47 V
• Current - Supply: 200mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 100-SQFP
• Includes: Clock Shift, Data Rate Adaption, Multipoint Switching
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Other names: PEF24470HV1.3X; SP000007617

PRELIMINARY
1
The new switching family, called SWITI, provides a complete and cost-effective solution
for all switching systems. The family is divided in two sub-families, the MTSI family and
the HTSI family. The Preliminary Data Sheet describes the functionality and
characteristic of the MTSI devices.
The devices can be used in today’s switching applications, e.g. conventional PBXs and
central offices, as well as in H.100/H.110 applications (only the HTSI family), which are
the key to high performing CTI- and Voice-over-IP-applications, one of the most
important future technologies in telecommunications.
The main requirements of today’s switching applications are met by the following
features:
• Constant delay e.g. to support wide band data switching, or channel bundling
• Bit switching/subchannel switching to support applications such as mobile base
In addition, the SWITI family provides new features to ensure a broad range of
configurations to make it possible to adapt the device to all switching applications:
• A compliant H.100/H.110 interface (HTSI)
• 8-channel stream-to-stream switching capability (HTSI)
• Message mode, which allows to assign a preset value to any output time-slot
• GPIO (General Purpose I/O) port, which is controlled from the external µP
SWITI family. The SWITI family consists of 6 ICs with different switching capacities. The
possible configurations are shown in
H.100 / H.110 interface, while the MTSIs are standard switching devices. All devices can
be programmed easily, thus helping the designer/programmer to integrate the device
into his application comfortably.
Table 2
Name
HTSI-XL (H-Mode)
HTSI-XL (M-Mode)
HTSI-L (H-Mode)
HTSI-L (M-Mode)
Preliminary Data Sheet
stations, DECT, computer telephony
Overview
SWITI Family Tree
Package
P-BGA-217-1
P-BGA-217-1
Table
PEF 24471
PEF 20471
PEF 24471
PEF 20471
HTSI-XL
HTSI-XL
HTSI-L
HTSI-L
Sales
code
3
2. The HTSI versions provide an additional
Connec-
2048
tions
1024
PEF 20450 / 20470 / 24470
Local bus
IN/OUT
16/16
32/32
16/16
32/32
H-Bus IO
2001-11-20
Overview
32
32
-
-