w925e625 ETC-unknow, w925e625 Datasheet - Page 9

no-image

w925e625

Manufacturer Part Number
w925e625
Description
8-bit Cid Microcontroller
Manufacturer
ETC-unknow
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
w925e625FG
Manufacturer:
Nuvoton Technology Corporation of America
Quantity:
10 000
W925E/C625
Interrupts:
The W925E/C625 provides 11 interrupt resources with two priority level, including 4 external interrupt
sources, 2 timer interrupts, 1 CID interrupt, 1 divider interrupt, 1 serial port interrupt, 1 comparator
interrupt and 1 watchdog timer interrupt.
Power Management:
The W925E/C625 has IDLE and POWER DOWN modes of operation. In the IDLE mode, the clock to
the CPU core is stopped however the functions of the timers, divider, CID and interrupts are active
continuously. In the POWER DOWN mode, both of the system clock stop oscillating and the chip
operation is completely stopped. POWER DOWN mode is the state of the lowest power consumption.
6.1
Memory Organization
The W925E/C625 separates the memory into two separate sections, the Program Memory and the
Data Memory. The Program Memory is used to store the instruction op-codes and look-up table data,
while the Data Memory is used to store data or for memory mapped devices.
Program Memory:
The Program Memory on the W925E/C625 can be up to 64K bytes. The total 64K bytes
EEPROM/MASK ROM are used to store the op-codes and the whole 64K can be used to store look-
up table data.
00000
64K bytes
EEPROM /
MASK ROM
0FFFF
Figure 6-1 Program Memory Map
Data Memory:
The W925E/C625 contains on-chip 4K + 224 bytes MOVX RAM of Data Memory, which can only be
accessed by MOVX instructions from the address 0000H to 0FFFH and from 2000H to 20FEH. In
addition, the W925E/C625 has 256 bytes of on-chip scratchpad RAM. This can be accessed either by
direct addressing or by indirect addressing. There are also Special Function Registers (SFRs), which
can only be accessed by direct addressing. Since the scratchpad RAM is only 256 bytes, it can be
used only when data contents are small. In the event that larger data contents are present, the only
one selection is on-chip MOVX RAM. The on-chip MOVX RAM can only be accessed by a MOVX
instruction. However, the on-chip RAM has the fastest access times. The memory map is shown
Figure 6-2 and Figure 6-3 shows the scratchpad RAM/Register addressing.
Publication Release Date: July 4, 2005
- 9 -
Revision A10

Related parts for w925e625