EP1C4 ALTERA [Altera Corporation], EP1C4 Datasheet - Page 44

no-image

EP1C4

Manufacturer Part Number
EP1C4
Description
Cyclone FPGA Family Data Sheet
Manufacturer
ALTERA [Altera Corporation]
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
EP1C4740028
Manufacturer:
ALTERA
0
Part Number:
EP1C4F324
Manufacturer:
ALTERA
0
Part Number:
EP1C4F324
Manufacturer:
ALTERA
Quantity:
30
Part Number:
EP1C4F3246N
Manufacturer:
ALTERA
Quantity:
5 510
Part Number:
EP1C4F3246N
Manufacturer:
HARRIS
Quantity:
5 510
Part Number:
EP1C4F324B L
Manufacturer:
ALTERA
0
Part Number:
EP1C4F324C6
Manufacturer:
ALTERA
Quantity:
3
Part Number:
EP1C4F324C6
Manufacturer:
Altera
Quantity:
10 000
Part Number:
EP1C4F324C6
Manufacturer:
ALTERA
0
Part Number:
EP1C4F324C6
Manufacturer:
ALTERA
Quantity:
20 000
Part Number:
EP1C4F324C6N
Manufacturer:
ALTERA
Quantity:
5 510
Part Number:
EP1C4F324C6N
Manufacturer:
ALTERA
Quantity:
250
Cyclone Device Handbook, Volume 1
2–38
Preliminary
f
Programmable Duty Cycle
The programmable duty cycle allows PLLs to generate clock outputs with
a variable duty cycle. This feature is supported on each PLL post-scale
counter (g0, g1, e). The duty cycle setting is achieved by a low- and high-
time count setting for the post-scale dividers. The Quartus II software
uses the frequency input and the required multiply or divide rate to
determine the duty cycle choices.
Control Signals
There are three control signals for clearing and enabling PLLs and their
outputs. You can use these signals to control PLL resynchronization and
the ability to gate PLL output clocks for low-power applications.
The pllenable signal enables and disables PLLs. When the pllenable
signal is low, the clock output ports are driven by ground and all the PLLs
go out of lock. When the pllenable signal goes high again, the PLLs
relock and resynchronize to the input clocks. An input pin or LE output
can drive the pllenable signal.
The areset signals are reset/resynchronization inputs for each PLL.
Cyclone devices can drive these input signals from input pins or from
LEs. When areset is driven high, the PLL counters will reset, clearing
the PLL output and placing the PLL out of lock. When driven low again,
the PLL will resynchronize to its input as it relocks.
The pfdena signals control the phase frequency detector (PFD) output
with a programmable gate. If you disable the PFD, the VCO will operate
at its last set value of control voltage and frequency with some drift, and
the system will continue running when the PLL goes out of lock or the
input clock disables. By maintaining the last locked frequency, the system
has time to store its current settings before shutting down. You can either
use their own control signal or gated locked status signals to trigger the
pfdena signal.
For more information on Cyclone PLLs, see
Cyclone
Devices.
Chapter 6, Using PLLs in
Altera Corporation
January 2007

Related parts for EP1C4