HD6412350 Hitachi, HD6412350 Datasheet - Page 111

• Manufacturer Part Number: HD6412350
• Description: (HD6412350 / HD6432351) 16-BIT MICROCONTROLLER
• Manufacturer: Hitachi

5.1
5.1.1
The H8S/2350 Series controls interrupts by means of an interrupt controller. The interrupt
controller has the following features:
Two interrupt control modes
Priorities settable with IPR
Independent vector addresses
Nine external interrupts
DTC and DMAC control
Any of two interrupt control modes can be set by means of the INTM1 and INTM0 bits in
An interrupt priority register (IPR) is provided for setting interrupt priorities. Eight priority
NMI is assigned the highest priority level of 8, and can be accepted at all times.
All interrupt sources are assigned independent vector addresses, making it unnecessary for
NMI is the highest-priority interrupt, and is accepted at all times. Rising edge or falling
Falling edge, rising edge, or both edge detection, or level sensing, can be selected for IRQ7
DTC and DMAC activation is performed by means of interrupts.
the system control register (SYSCR).
levels can be set for each module for all interrupts except NMI.
the source to be identified in the interrupt handling routine.
edge can be selected for NMI.
to IRQ0.
Overview
Features
Section 5 Interrupt Controller
91