HD6412350 Hitachi, HD6412350 Datasheet - Page 254

• Manufacturer Part Number: HD6412350
• Description: (HD6412350 / HD6432351) 16-BIT MICROCONTROLLER
• Manufacturer: Hitachi

Figure 7-5 illustrates operation in idle mode.
The number of transfers is specified as 16 bits in ETCR. ETCR is decremented by 1 each time a
transfer is executed, and when its value reaches H'0000, the DTE bit is cleared and transfer ends.
If the DTIE bit is set to 1 at this time, an interrupt request is sent to the CPU or DTC.
The maximum number of transfers, when H'0000 is set in ETCR, is 65,536.
Transfer requests (activation sources) consist of A/D converter conversion end interrupts, external
requests, SCI transmission complete and reception complete interrupts, and TPU channel 0 to 5
compare match/input capture A interrupts. External requests can be set for channel B only.
When the DMAC is used in single address mode, only channel B can be set.
234
MAR
Figure 7-5 Operation in Idle Mode
Transfer
1 byte or word transfer performed in
response to 1 transfer request
IOAR