MC9S08DZ60ACLF Freescale Semiconductor, MC9S08DZ60ACLF Datasheet - Page 319

• Manufacturer Part Number: MC9S08DZ60ACLF
• Description: IC MCU 60K FLASH 4K RAM 48-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08DZ60ACLF

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, LIN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• Processor Series: S08DZ
• Core: HCS08
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: CAN, I2C, SCI, SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 2
• Operating Supply Voltage: 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWS08
• Development Tools By Supplier: DEMO9S08DZ60
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 24 Channel
• For Use With: DEMO9S08DZ60 - BOARD DEMOEVB9S08DZ60 - BOARD EVAL FOR 9S08DZ60
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 16
Timer Pulse-Width Modulator (S08TPMV3)
16.1
The TPM is a one-to-eight-channel timer system which supports traditional input capture, output compare,
or edge-aligned PWM on each channel. A control bit allows the TPM to be configured such that all
channels may be used for center-aligned PWM functions. Timing functions are based on a 16-bit counter
with prescaler and modulo features to control frequency and range (period between overflows) of the time
reference. This timing system is ideally suited for a wide range of control applications, and the
center-aligned PWM capability extends the field of application to motor control in small appliances.
The TPM uses one input/output (I/O) pin per channel, TPMxCHn, where x is the TPM number (for
example, 1 or 2) and n is the channel number (for example, 0–5). The TPM shares its I/O pins with
general-purpose I/O port pins (refer to the
MC9S08DZ60 Series MCUs have two TPM modules. In all packages, TPM2 is 2-channel. The number of
channels available on external pins in TPM1 depends on the package:
Freescale Semiconductor
•
•
Six channels in 64-pin and 48-pin packages
Four channels in 32-pin packages.
Introduction
This chapter refers to S08TPM version 3, which applies to the 0M74K and
newer mask sets of this device. 3M05C and older mask set devices use
S08TPM version 2. If your device uses mask 3M05C or older, please refer
to
information pertaining to that module.
Appendix B, “Timer Pulse-Width Modulator (TPMV2) on page 391
MC9S08DZ60 Series Data Sheet, Rev. 4
Pins and Connections
NOTE
chapter for more information).
for
319