R4F24269NVFQV Renesas Electronics America, R4F24269NVFQV Datasheet - Page 1021

• Manufacturer Part Number: R4F24269NVFQV
• Description: MCU 256KB FLASH 64K 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2400r

Specifications of R4F24269NVFQV

• Core Processor: H8S/2600
• Core Size: 16/32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, I²C, IrDA, SCI, SSU, UART/USART
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

H8S/2426, H8S/2426R, H8S/2424 Group
This LSI includes two units (units 0 and 1) of successive approximation type 10-bit A/D
converter. In the H8S/2426 group and H8S/2426R group, the A/D converter units 0 and 1 allow up
to eight analog input channels to be selected. In the H8S/2424 group, unit 0 allows up to eight
analog input channels to be selected while unit 1 allows up to two channels.
Figures 17.1 and 17.2 show block diagrams of the A/D converter units 0 and 1, respectively.
17.1
• 10-bit resolution
• Input channels:
• Conversion cycle: 64 cycles or 40 cycles (A/D conversion clock)
• Two kinds of operating modes
• Separate A/D conversion clock specifiable for each unit (φ, φ/2, or φ/4)
• Eight data registers for A/D converter unit 0 and eight data registers for unit 1*
• Sample and hold functionality
• Three types of conversion start
• Interrupt source
• Module stop state specifiable
Notes: 1. Continuous A/D conversion on 1 to 2 channels in the H8S/2424 group.
REJ09B0466-0350 Rev. 3.50
Jul 09, 2010
H8S/2426 group and H8S/2426R group: Eight channels (total of 16 channels for the two units)
H8S/2424 group: Eight channels for unit 0 and two channels for unit 1 (total of 10 channels for
the two units)
⎯ Single mode: Single-channel A/D conversion
⎯ Scan mode: Continuous A/D conversion on 1 to 4 channels, or 1 to 8 channels*
data registers for the two units)
Results of A/D conversion are held in a 16-bit data register for each channel.
Conversion can be started by software, a conversion start trigger by the 16-bit timer pulse unit
(TPU) or 8-bit timer (TMR), or an external trigger signal.
A/D conversion end interrupt (ADI) request can be generated.
2. Two data registers for unit 1 (total of ten data registers for the two units) in the
Features
H8S/2424 group.
Section 17 A/D Converter
Section 17 A/D Converter
2
(total of 16
Page 991 of 1372
1