UPD78F1174AGF-GAT-AX Renesas Electronics America, UPD78F1174AGF-GAT-AX Datasheet - Page 231

• Manufacturer Part Number: UPD78F1174AGF-GAT-AX
• Description: MCU 16BIT 78K0R/KX3 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Kx3r

Specifications of UPD78F1174AGF-GAT-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, EBI/EMI, I²C, LIN, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 111
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

(4) Example of setting procedure when stopping the high-speed system clock
<3> If some peripheral hardware macros are not used, supply of the input clock to each hardware macro can
The high-speed system clock can be stopped (disabling clock input if the external clock is used) in the following
two ways.
• Executing the STOP instruction
• Setting MSTOP to 1
(a) To execute a STOP instruction
<1> Setting to stop peripheral hardware
<2> Setting the X1 clock oscillation stabilization time after STOP mode is released
<3> Executing the STOP instruction
be stopped.
(PER0 register)
(PER1 register)
Remark RTCEN:
Caution Be sure to clear bits 1 to 7 of PER1 to 0.
RTCEN
xxxEN
Stop peripheral hardware that cannot be used in the STOP mode (for peripheral hardware that
cannot be used in STOP mode, see CHAPTER 19 STANDBY FUNCTION).
If the X1 clock oscillates before the STOP mode is entered, set the value of the OSTS register before
executing the STOP instruction.
When the STOP instruction is executed, the system is placed in the STOP mode and X1 oscillation is
stopped (the input of the external clock is disabled).
0
0
1
DACEN:
ADCEN:
IIC0EN:
SAU1EN: Control of the serial array unit 1 input clock
SAU0EN: Control of the serial array unit 0 input clock
TAU1EN: Control of the timer array unit 1 input clock
TAU0EN: Control of the timer array unit 0 input clock
EXBEN:
Stops input clock supply.
Supplies input clock.
DACEN
0
Control of the real-time counter input clock
Control of the D/A converter input clock
Control of the A/D converter input clock
Control of the serial interface IIC0 input clock
Control of the external bus interface input clock
ADCEN
0
CHAPTER 6 CLOCK GENERATOR
User’s Manual U18432EJ5V0UD
IIC0EN
0
Input clock control
SAU1EN
0
SAU0EN
0
TAU1EN
0
TAU0EN
EXBEN
229