Z8F6401AN020SC00TR Zilog, Z8F6401AN020SC00TR Datasheet - Page 149

• Manufacturer Part Number: Z8F6401AN020SC00TR
• Description: IC ENCORE MCU FLASH 64K 44LQFP
• Manufacturer: Zilog
• Series: Encore!®r

Specifications of Z8F6401AN020SC00TR

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 31
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 44-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: Z8F6401AN020SC00T

Table 79. DMA_ADC Status Register (DMAA_STAT)
PS017610-0404
RESET
FIELD
ADDR
BITS
R/W
DMA Status Register
R
7
0
The DMA Status register indicates the DMA channel that generated the interrupt and the
ADC Analog Input that is currently undergoing conversion. Reads from this register reset
the Interrupt Request Indicator bits (IRQA, IRQ1, and IRQ0) to 0. Therefore, software
interrupt service routines that read this register must process all three interrupt sources
from the DMA.
CADC[3:0]—Current ADC Analog Input
This field identifies the Analog Input that the ADC is currently converting.
Reserved
This bit is reserved and must be 0.
IRQA—DMA_ADC Interrupt Request Indicator
This bit is automatically reset to 0 each time a read from this register occurs.
0 = DMA_ADC is not the source of the interrupt from the DMA Controller.
1 = DMA_ADC completed transfer of data from the last ADC Analog Input and generated
an interrupt.
IRQ1—DMA1 Interrupt Request Indicator
This bit is automatically reset to 0 each time a read from this register occurs.
0 = DMA1 is not the source of the interrupt from the DMA Controller.
1 = DMA1 completed transfer of data to/from the End Address and generated an interrupt.
IRQ0—DMA0 Interrupt Request Indicator
This bit is automatically reset to 0 each time a read from this register occurs.
0 = DMA0 is not the source of the interrupt from the DMA Controller.
1 = DMA0 completed transfer of data to/from the End Address and generated an interrupt.
R
6
0
CADC[3:0]
R
5
0
R
4
0
Z8F640x/Z8F480x/Z8F320x/Z8F240x/Z8F160x
FBFH
Reserved
R
3
0
Direct Memory Access Controller
IRQA
R
2
0
IRQ1
1
R
0
Z8 Encore!
IRQ0
R
0
0
®
131