Z8F6401AN020SC00TR Zilog, Z8F6401AN020SC00TR Datasheet - Page 177

• Manufacturer Part Number: Z8F6401AN020SC00TR
• Description: IC ENCORE MCU FLASH 64K 44LQFP
• Manufacturer: Zilog
• Series: Encore!®r

Specifications of Z8F6401AN020SC00TR

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 31
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 44-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: Z8F6401AN020SC00T

PS017610-0404
•
•
•
zero). If the Z8F640x family device is not in Debug mode or if the Read Protect
Option Bit is enabled, this command returns
Write Program Memory (0AH)—The Write Program Memory command writes data
to Program Memory. This command is equivalent to the LDC and LDCI instructions.
Data can be written 1-65536 bytes at a time (65536 bytes can be written by setting size
to zero). The on-chip Flash Controller must be written to and unlocked for the
programming operation to occur. If the Flash Controller is not unlocked, the data is
discarded. If the Z8F640x family device is not in Debug mode or if the Read Protect
Option Bit is enabled, the data is discarded.
Read Program Memory (0BH)—The Read Program Memory command reads data
from Program Memory. This command is equivalent to the LDC and LDCI
instructions. Data can be read 1-65536 bytes at a time (65536 bytes can be read by
setting size to zero). If the Z8F640x family device is not in Debug mode or if the Read
Protect Option Bit is enabled, this command returns
Write Data Memory (0CH)—The Write Data Memory command writes data to Data
Memory. This command is equivalent to the LDE and LDEI instructions. Data can be
written 1-65536 bytes at a time (65536 bytes can be written by setting size to zero). If
the Z8F640x family device is not in Debug mode or if the Read Protect Option Bit is
enabled, the data is discarded.
DBG <-- 09H
DBG <-- {4’h0,Register Address[11:8]
DBG <-- Register Address[7:0]
DBG <-- Size[7:0]
DBG --> 1-256 data bytes
DBG <-- 0AH
DBG <-- Program Memory Address[15:8]
DBG <-- Program Memory Address[7:0]
DBG <-- Size[15:8]
DBG <-- Size[7:0]
DBG <-- 1-65536 data bytes
DBG <-- 0BH
DBG <-- Program Memory Address[15:8]
DBG <-- Program Memory Address[7:0]
DBG <-- Size[15:8]
DBG <-- Size[7:0]
DBG --> 1-65536 data bytes
DBG <-- 0CH
DBG <-- Data Memory Address[15:8]
DBG <-- Data Memory Address[7:0]
DBG <-- Size[15:8]
DBG <-- Size[7:0]
DBG <-- 1-65536 data bytes
Z8F640x/Z8F480x/Z8F320x/Z8F240x/Z8F160x
FFH
for all the data values.
FFH
for the data.
On-Chip Debugger
Z8 Encore!
®
159