HD64F2134FA20 Renesas Electronics America, HD64F2134FA20 Datasheet - Page 148

• Manufacturer Part Number: HD64F2134FA20
• Description: IC H8S MCU FLASH 128K 80QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of HD64F2134FA20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: IrDA, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 58
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 80-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 4 Exception Handling
4.1.2
Exceptions originate from various sources. Trap instructions and interrupts are handled as follows:
1. The program counter (PC) and condition-code register (CCR) are pushed onto the stack.
2. The interrupt mask bits are updated. The T bit is cleared to 0.
3. A vector address corresponding to the exception source is generated, and program execution
For a reset exception, steps 2 and 3 above are carried out.
4.1.3
The exception sources are classified as shown in figure 4.1. Different vector addresses are
assigned to different exception sources.
Table 4.2 lists the exception sources and their vector addresses.
Rev. 4.00 Jun 06, 2006 page 92 of 1004
REJ09B0301-0400
starts from that address.
Exception
sources
Exception Handling Operation
Exception Sources and Vector Table
Reset
Trace
Interrupts
Direct transition
Trap instruction
(Cannot be used in the H8S/2138 Group or H8S/2134 Group)
External interrupts: NMI, IRQ7 to IRQ0
Internal interrupts: interrupt sources in
on-chip supporting modules
Figure 4.1 Exception Sources