M052LAN Nuvoton Technology Corporation of America, M052LAN Datasheet - Page 199

• Manufacturer Part Number: M052LAN
• Description: IC MCU 32BIT 8KB FLASH 48LQFP
• Manufacturer: Nuvoton Technology Corporation of America
• Series: NuMicro M051™r

Specifications of M052LAN

• Core Processor: ARM Cortex-M0
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: EBI/EMI, I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 40
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

6.6.4.7 PWM-Timer Start Procedure
6.6.4.8 PWM-Timer Stop Procedure
NuMicro M051
The following procedure is recommended for starting a PWM drive.
1.
2.
3.
4.
5.
6.
7.
8.
Method 1 :
Set 16-bit down counter (CNR) as 0, and monitor PDR (current value of 16-bit down-counter).
When PDR reaches to 0, disable PWM-Timer (CHxEN in PCR). (Recommended)
Method 2:
Set 16-bit down counter (CNR) as 0. When interrupt request happens, disable PWM-Timer
(CHxEN in PCR). (Recommended)
Method 3:
Disable PWM-Timer directly ((CHxEN in PCR). (Not recommended)
The reason why method 3 is not recommended is that disable CHxEN will immediately stop PWM
output signal and lead to change the duty of the PWM output, this may cause damage to the
control circuit of motor
Setup clock selector (CSR)
Setup prescaler (PPR)
Setup inverter on/off, dead zone generator on/off, auto-reload/one-shot mode and Stop
PWM-timer (PCR)
Setup comparator register (CMR) for setting PWM duty.
Setup PWM down-counter register (CNR) for setting PWM period.
Setup interrupt enable register (PIER)
Setup corresponding GPIO pins as PWM function (enable POE and disable CAPENR) for the
corresponding PWM channel.
Enable PWM timer start running (Set CHxEN = 1 in PCR)
™
Series Technical Reference Manual
- 199 -
Publication Release Date: Sept 14, 2010
Revision V1.2