TMPM333FDFG Toshiba, TMPM333FDFG Datasheet - Page 156

• Manufacturer Part Number: TMPM333FDFG
• Description: Microcontrollers (MCU) MCU w/ ARM Cortex-M3 512K FLASH, 32K SRAM
• Manufacturer: Toshiba

Specifications of TMPM333FDFG

• Processor Series: TX03
• Core: ARM Cortex M3
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 512K
• Rom Type: Flash
• Ram (kbytes): 32K
• Number Of Pins: 100
• Package: LQFP(14×14)
• Vcc: 3V
• Cpu Mhz: 40
• Ssp (ch) Spi: -
• I2c/sio (ch): 3
• Uart/sio (ch): 3
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: -
• Cs/wait Controller (ch): -
• Dma Controller: -
• 10-bit Da Converter: -
• 10-bit Ad Converter: 12
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 10
• Motor / Igbt Control: -
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: -
• Hardware Cec Controller: -
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit
• Lead Free Status / Rohs Status: Details

8.2
Port functions
8.2.8
Type
8.2.8.1
8.2.8.2
units of bits. Besides the general-purpose port function, the port H performs the functions of the 16-bit timer
input and the operation mode setting.
of the reset signal, if 「PH0」 is "High", the device enters single mode and boots from the on-chip flash memory.
If 「PH0」 is "Low", the device enters single BOOT mode and boots from the internal BOOT program.For
details of single boot mode, refer to "Flash Memory Operation".
up is enabled for PH0 and disabled for PH1 to PH7.
Port H data register
Port H output control register
Port H function register 1
Reserved
Port H pull-up control register
Port H input control register
Port H (PH0 to PH7)
The port H is a general-purpose, 8-bit input/output port. For this port, inputs and outputs can be specified in
While a reset signal is in "Low" state, the 「PH0/BOOT」 input and pull-up are enabled. At the rising edge
Reset initializes PH0 to PH7 bits of the port H as general-purpose ports with input and output disabled.Pull-
Port H Circuit Type
Port H Register
Note:Access to the "reserved" areas is prohibited.
T3
7
T3
6
Register name
T3
5
Page 136
T3
4
PHDATA
PHPUP
PHFR1
PHCR
PHIE
-
T3
3
T3
Base Address = 0x4000_01C0
2
TMPM333FDFG/FYFG/FWFG
Address (Base+)
0x002C
0x0000
0x0004
0x0008
0x0010
0x0038
T3
1
T5
0