ST72F324BJ6T6 STMicroelectronics, ST72F324BJ6T6 Datasheet - Page 152

• Manufacturer Part Number: ST72F324BJ6T6
• Description: IC MCU 8BIT 32K FLASH 44-LQFP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST72F324BJ6T6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3.8 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Processor Series: ST72F3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7232X-EVAL, ST7MDT20-DVP3, ST7MDT20J-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• For Use With: 497-6421 - BOARD EVAL DGTL BATT CHGR DESIGN497-5046 - KIT TOOL FOR ST7/UPSD/STR7 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 497-5590

Electrical characteristics
12.5.3
12.5.4
152/198
Supply and clock managers
The previous current consumption specified for the ST7 functional operating modes over
temperature range does not take into account the clock source current consumption. To
obtain the total device consumption, the two current values must be added (except for Halt
mode).
Table 91.
1. Data based on characterization results done with the external components specified in
2. As the oscillator is based on a current source, the consumption does not depend on the voltage.
On-chip peripherals
Table 92.
1. Data based on a differential I
2. Data based on a differential I
3. Data based on a differential I
4. Data based on a differential I
Symbol
I
I
I
I
I
.
DD(ADC)
DD(TIM)
DD(RCINT)
DD(SPI)
DD(SCI)
Symbol
I
I
I
DD(RES)
DD(PLL)
DD(LVD)
tested in production.
f
SPI master communication at maximum speed (data sent equal to 55h). This measurement includes the
pad toggling consumption.
SCI data transmit sequence.
conversions.
CPU
/4) and timer counter stopped (only TIMD bit set). Data valid for one timer.
16-bit timer supply current
SPI supply current
SCI supply current
ADC supply current when converting
Supply current of internal RC oscillator
Supply current of resonator oscillator
PLL supply current
LVD supply current
Oscillators, PLL and LVD current consumption
On-chip peripherals current consumption
Parameter
Parameter
DD
(2)
(3)
DD
DD
DD
measurement between reset configuration (SPI disabled) and a permanent
measurement between reset configuration (timer counter running at
measurement between SCI low power state (SCID = 1) and a permanent
measurement between reset configuration and continuous A/D
Doc ID13466 Rev 4
(1)
(4)
(1)(2)
T
A
= 25°C, f
Conditions
V
DD
CPU
Conditions
= 5V
= 4 MHz, V
see
Typ
625
360
150
on page 154
DD
Section 12.6.3
Section
= 5.0V
ST72324B-Auto
Max
300
12.6.3, not
Typ Unit
400
50
Unit
µA
µA