Z8F083ASJ020EG Zilog, Z8F083ASJ020EG Datasheet - Page 35

• Manufacturer Part Number: Z8F083ASJ020EG
• Description: IC ENCORE XP MCU FLASH 8K 28SOIC
• Manufacturer: Zilog
• Series: Encore!®r

Specifications of Z8F083ASJ020EG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, LED, POR, PWM, WDT
• Number Of I /o: 23
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 28-SOIC (7.5mm Width)
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 23
• Number Of Timers: 2
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• For Use With: 770-1002 - ISP 4PORT ZILOG Z8 ENCORE! MCU269-4672 - KIT DEVELOPMENT F083A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4558-5

Reset and Stop Mode Recovery
Reset Types
Table 8. Reset and Stop Mode Recovery Characteristics and Latency
PS026308-1207
Reset Type
System Reset
System Reset with Crystal
Oscillator Enabled
The reset controller in the Z8 Encore! F083A Series controls Reset and Stop Mode
Recovery operations. In a typical operation, the following events cause a Reset:
•
•
•
•
•
When the device is in STOP mode, a Stop Mode Recovery is initiated by either of the
following:
•
•
The VBO circuitry on the device generates the VBO reset when the supply voltage drops
below a minimum safe level.
The Z8 Encore! F083A Series provides different types of Reset operation. Stop Mode
Recovery is considered as a form of reset.
operating characteristics. The system reset is longer, if the external crystal oscillator is
enabled by the Flash option bits, allowing additional time for oscillator start-up.
Power-On Reset
Voltage Brownout
Watchdog Timer time-out (when configured by the WDT_RES Flash option bit to
initiate a reset).
External RESET pin assertion (when the alternate Reset function is enabled by the
GPIO register).
On-Chip Debugger initiated reset (OCDCTL[0] set to 1).
WDT time-out.
GPIO port input pin transition on an enabled Stop Mode Recovery source.
Control Registers
Reset (as applicable)
Reset (as applicable)
Reset Characteristics and Latency
Reset About 66 internal precision oscillator
Reset About 5000 internal precision oscillator
CPU
eZ8
Table 8
Reset Latency (Delay)
Cycles
Cycles
lists the types of reset and their
Z8 Encore!
Reset and Stop Mode Recovery
Product Specification
®
F083A Series
23