MCHC705JJ7CPE Freescale Semiconductor, MCHC705JJ7CPE Datasheet - Page 118

• Manufacturer Part Number: MCHC705JJ7CPE
• Description: IC MCU 8BIT 224 BYTES RAM 20PDIP
• Manufacturer: Freescale Semiconductor
• Series: HC05r

Specifications of MCHC705JJ7CPE

• Core Processor: HC05
• Core Size: 8-Bit
• Speed: 2.1MHz
• Connectivity: SIO
• Peripherals: POR, Temp Sensor, WDT
• Number Of I /o: 14
• Program Memory Size: 6KB (6K x 8)
• Program Memory Type: OTP
• Ram Size: 224 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 4x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Processor Series: HC705JJ
• Core: HC05
• Data Bus Width: 8 bit
• Data Ram Size: 224 B
• Interface Type: SIOP
• Maximum Clock Frequency: 2.1 MHz
• Number Of Programmable I/os: 14
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 4 Channel
• Package: 20PDIP
• Family Name: HC05
• Maximum Speed: 2.1 MHz
• Operating Supply Voltage: 3.3|5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Personality EPROM (PEPROM)
12.4 PEPROM Reading
This sequence shows how to read the PEPROM:
Reading the PEPROM is easiest when each PEPROM column contains one byte. Selecting a row 0 bit
selects the first bit, and incrementing the PEPROM bit select register (PEBSR) selects the next bit in row
1 from the same column. Incrementing PEBSR seven more times selects the remaining bits of the column
and ends up selecting the bit in row 0 of the next column, thereby setting the row 0 flag, PEPRZF.
12.5 PEPROM Erasing
MCUs with windowed packages permit PEPROM erasing with ultraviolet light. Erase the PEPROM by
exposing it to 15 Ws/cm
light source 1 inch from the window. Do not use a shortwave filter. The erased state of a PEPROM bit is
a logic 0.
118
1. Select a bit by writing to the PEBSR.
2. Read the PEDATA bit in the PESCR.
3. Store the PEDATA bit in RAM or in a register.
4. Select another bit by changing the PEBSR.
5. Continue reading and storing the PEDATA bits until the required personality EPROM data is
retrieved and stored.
A PEPROM byte that has been read can be transferred to the personality
EPROM bit select register (PEBSR) as a temporary storage location such
that subsequent reads of the PEBSR quickly yield that PEPROM byte.
MC68HC705JJ7 • MC68HC705JP7 Advance Information Data Sheet, Rev. 4.1
2
of ultraviolet light with a wavelength of 2537 angstroms. Position the ultraviolet
NOTE
Freescale Semiconductor