HD6417708SF60 Renesas Electronics America, HD6417708SF60 Datasheet - Page 300

• Manufacturer Part Number: HD6417708SF60
• Description: IC SUPERH MPU ROMLESS 144LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417708SF60

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 60MHz
• Connectivity: EBI/EMI, SCI, SmartCard
• Peripherals: POR, WDT
• Number Of I /o: 8
• Program Memory Type: ROMless
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Ram Size: -
• Program Memory Size: -
• Data Converters: -

10.3.7
Burst ROM Interface
Setting bits A0BST (1,0), A5BST (1,0), and A6BST (1,0) in BCR1 to a non-zero value allows
burst ROM to be connected to areas 0, 5, and 6. The burst ROM interface provides high-speed
access to ROM that has a nibble access function. The timing for nibble access to burst ROM is
shown in figure 10.39. Two wait cycles are set. Basically, access is performed in the same way as
for normal space, but when the first cycle ends, the CS0 signal is not negated, and only the address
is changed before the next access is executed. When 8-bit ROM is connected, the number of
consecutive accesses can be set as 4, 8, or 16 by bits A0BST (1,0), A5BST (1,0), or A6BST (1,0).
When 16-bit ROM is connected, 4 or 8 can be set in the same way. When 32-bit ROM is
connected, only 4 can be set.
WAIT pin sampling is performed in the first access if one or more wait states are set, and is
always performed in the second and subsequent accesses. WAIT is a synchronous signal.
The second and subsequent access cycles also comprise two cycles when a burst ROM setting is
made and the wait specification is 0. The timing in this case is shown in figure 10.40.
280