HD6417708SF60 Renesas Electronics America, HD6417708SF60 Datasheet - Page 374

• Manufacturer Part Number: HD6417708SF60
• Description: IC SUPERH MPU ROMLESS 144LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417708SF60

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 60MHz
• Connectivity: EBI/EMI, SCI, SmartCard
• Peripherals: POR, WDT
• Number Of I /o: 8
• Program Memory Type: ROMless
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Ram Size: -
• Program Memory Size: -
• Data Converters: -

Bit 2—Transmit End (TEND): Indicates that when the last bit of a serial character was
transmitted, SCTDR did not contain valid data, so transmission has ended. TEND is a read-only
bit and cannot be written.
Bit 2: TEND
0
1
Bit 1—Multiprocessor Bit (MPB): Stores the value of the multiprocessor bit in receive data when
a multiprocessor format is selected for receiving in asynchronous mode. MPB is a read-only bit
and cannot be written.
Bit 1: MPB
0
1
Bit 0—Multiprocessor Bit Transfer (MPBT): Stores the value of the multiprocessor bit added to
transmit data when a multiprocessor format is selected for transmitting in asynchronous mode. The
MPBT setting is ignored in synchronous mode, when a multiprocessor format is not selected, or
when the SCI is not transmitting.
Bit 0: MPBT
0
1
354
Description
Transmission is in progress.
TEND is cleared to 0 when software reads TDRE after it has been set to 1, then
writes 0 in TDRE, or data is written in SCTDR.
End of transmission.
TEND is set to 1 when the chip is reset or enters standby mode, TE is cleared to
0 in the serial control register (SCSCR), or TDRE is 1 when the last bit of a one-
byte serial character is transmitted.
Description
Multiprocessor bit value in receive data is 0.
If RE is cleared to 0 when a multiprocessor format is selected, the MPB retains
its previous value.
Multiprocessor bit value in receive data is 1.
Description
Multiprocessor bit value in transmit data is 0.
Multiprocessor bit value in transmit data is 1.
(Initial value)
(Initial value)
(Initial value)