HD64F2623FA20J Renesas Electronics America, HD64F2623FA20J Datasheet - Page 661

• Manufacturer Part Number: HD64F2623FA20J
• Description: IC H8S MCU FLASH 256K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2623FA20J

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Bit 5—Erase Setup Bit 1 (ESU1): Prepares for a transition to erase mode. Set this bit to 1 before
setting the E1 bit in FLMCR1 to 1. Do not set the SWE1, PSU1, EV1, PV1, E1, or P1 bit at the
same time.
Bit 4—Program Setup Bit 1 (PSU1): Prepares for a transition to program mode. Set this bit to 1
before setting the P1 bit in FLMCR1 to 1. Do not set the SWE1, ESU1, EV1, PV1, E1, or P1 bit
at the same time.
Bit 3—Erase-Verify 1 (EV1): Selects erase-verify mode transition or clearing. Do not set the
SWE1, ESU1, PSU1, PV1, E1, or P1 bit at the same time.
Bit 5
ESU1
0
1
Bit 4
PSU1
0
1
Bit 3
EV1
0
1
Description
Erase setup cleared
Erase setup
[Setting condition]
When FWE = 1 and SWE1 = 1
Description
Program setup cleared
Program setup
[Setting condition]
When FWE = 1 and SWE1 = 1
Description
Erase-verify mode cleared
Transition to erase-verify mode
[Setting condition]
When FWE = 1 and SWE1 = 1
Rev. 5.00 Jan 10, 2006 page 635 of 1042
Section 19 ROM (Preliminary)
REJ09B0275-0500
(Initial value)
(Initial value)
(Initial value)