HFIXF1110CC.B2 Q E000 Intel, HFIXF1110CC.B2 Q E000 Datasheet - Page 165

• Manufacturer Part Number: HFIXF1110CC.B2 Q E000
• Manufacturer: Intel

Specifications of HFIXF1110CC.B2 Q E000

• Number Of Transceivers: 1
• Screening Level: Commercial
• Mounting: Surface Mount
• Operating Temperature (min): 0C
• Operating Temperature (max): 70C
• Lead Free Status / RoHS Status: Not Compliant

Datasheet
Table 95. TX FIFO Low Watermark Ports 0 to 9 ($ 0x60A - 0x613) (Sheet 2 of 2)
TX FIFO Low
Watermark Port 4
TX FIFO Low
Watermark Port 5
TX FIFO Low
Watermark Port 6
TX FIFO Low
Watermark Port 7
TX FIFO Low
Watermark Port 8
TX FIFO Low
Watermark Port 9
1. R = Read Only; CoR = Clear on Read; W = Write; R/W = Read/Write
2. For all TX FIFO Low Watermark Registers, the following bit definitions apply to all ports (0:9):
Bits 31:13 - Reserved and R.
Bits 12:0 - Described above.
Name
2
Intel
®
IXF1110 10-Port 1000 Mbps Ethernet Media Access Controller
Description
Low watermark for TX FIFO port 4. The default
value is 464 bytes. When the amount of data
falls below this value, the TX FIFO status
indicates “STARVING”. This implies further up
in the system that more data must be sent to
this port to prevent an underrun.
Low watermark for TX FIFO port 5. The default
value is 464 bytes. When the amount of data
falls below this value, the TX FIFO status
indicates “STARVING”. This implies further up
in the system that more data must be sent to
this port to prevent an underrun.
Low watermark for TX FIFO port 6. The default
value is 464 bytes. When the amount of data
falls below this value, the TX FIFO status
indicates “STARVING”. This implies further up
in the system that more data must be sent to
this port to prevent an underrun.
Low watermark for TX FIFO port 7. The default
value is 464 bytes. When the amount of data
falls below this value, the TX FIFO status
indicates “STARVING”. This implies further up
in the system that more data must be sent to
this port to prevent an underrun.
Low watermark for TX FIFO port 8. The default
value is 464 bytes. When the amount of data
falls below this value, the TX FIFO status
indicates “STARVING”. This implies further up
in the system that more data must be sent to
this port to prevent an underrun.
Low watermark for TX FIFO port 9. The default
value is 464 bytes. When the amount of data
falls below this value, the TX FIFO status
indicates “STARVING”. This implies further up
in the system that more data must be sent to
this port to prevent an underrun.
Order Number: 250210, Revision: 009
Intel
®
IXF1110 10-Port 1000 Mbps Ethernet Media Access Controller
Address
0x60E
0x60F
0x610
0x611
0x612
0x613
Type
R/W
R/W
R/W
R/W
R/W
R/W
1
0x000001D0
0x000001D0
0x000001D0
0x000001D0
0x000001D0
0x000001D0
07-Oct-2005
Default
165