LAN9311-NU SMSC, LAN9311-NU Datasheet - Page 204

• Manufacturer Part Number: LAN9311-NU
• Description: IC ETHER SW 2PRT 16BIT 128-VTQFP
• Manufacturer: SMSC
• Type: Two Port Managed Ethernet Switchr

Specifications of LAN9311-NU

• Controller Type: Ethernet Switch Controller
• Interface: Serial EEPROM
• Voltage - Supply: 3.3V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 128-TQFP, 128-VQFP
• Product: Ethernet Switches
• Number Of Transceivers: 1
• Standard Supported: 802.3, 802.3u
• Data Rate: 10 MB, 100 MB
• Supply Voltage (max): 3.3 V
• Supply Voltage (min): 0 V
• Maximum Operating Temperature: + 70 C
• Ethernet Connection Type: 10 Base-T, 100 Base-TX
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• For Use With: 638-1076 - EVALUATION BOARD LAN9311-NU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 638-1075

Revision 1.7 (06-29-10)
14.2.5.3
31:16
BITS
15:0
Sequence ID (SEQ_ID)
This field contains the Sequence ID from the 1588 Sync or Delay_Req
packet.
Source UUID High (SRC_UUID_HI)
This field contains the high 16-bits of the Source UUID from the 1588 Sync
or Delay_Req packet.
(1588_SEQ_ID_SRC_UUID_HI_RX_CAPTURE_x)
Port x 1588 Sequence ID, Source UUID High-WORD Receive Capture Register
Note: The selection between Sync or Delay_Req packets is based on the corresponding
Note: There are multiple instantiations of this register, one for each port of the LAN9311/LAN9311i.
Note: For Port 0(Host MAC), receive is defined as data from the switch fabric, while transmit is to
master/slave bit in the
Refer to
the switch fabric.
Offset:
Section 14.2.5
Port 1: 108h
Port 2: 128h
Port 0: 148h
DESCRIPTION
1588 Configuration Register
for additional information.
DATASHEET
204
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Size:
(1588_CONFIG).
32 bits
TYPE
SMSC LAN9311/LAN9311i
RO
RO
DEFAULT
0000h
0000h
Datasheet