PIC16F1827-E/P Microchip Technology Inc., PIC16F1827-E/P Datasheet - Page 44

• Manufacturer Part Number: PIC16F1827-E/P
• Description: 7 KB Flash, 384 bytes RAM, 32 MHz Int. Osc, 16 I/0, Enhanced Mid Range Core
• Manufacturer: Microchip Technology Inc.

Specifications of PIC16F1827-E/P

• A/d Inputs: 12-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 8 MIPS
• Eeprom Memory: 256 Bytes
• Input Output: 16
• Interface: CAN/I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 18-pin PDIP
• Programmable Memory: 7K Bytes
• Ram Size: 384 Bytes
• Speed: 32 MHz
• Timers: 4-8-bit, 1-16-bit
• Voltage, Range: 1.8-5.5 V
• Standby Current (pic16lf182x): 30 nA @ 1.8 V, Typical

PIC16(L)F1826/27
REGISTER 4-1:
DS41391D-page 44
bit 7
Legend:
R = Readable bit
‘0’ = Bit is cleared
bit 13
bit 12
bit 11
bit 10-9
bit 8
bit 7
bit 6
bit 5
bit 4-3
R/P-1
CP
FCMEN: Fail-Safe Clock Monitor Enable bit
1 = Fail-Safe Clock Monitor is enabled
0 = Fail-Safe Clock Monitor is disabled
IESO: Internal External Switchover bit
1 = Internal/External Switchover mode is enabled
0 = Internal/External Switchover mode is disabled
CLKOUTEN: Clock Out Enable bit
If FOSC configuration bits are set to LP, XT, HS modes:
All other FOSC modes:
BOREN<1:0>: Brown-out Reset Enable bits
11 = BOR enabled
10 = BOR enabled during operation and disabled in Sleep
01 = BOR controlled by SBOREN bit of the BORCON register
00 = BOR disabled
CPD: Data Code Protection bit
1 = Data memory code protection is disabled
0 = Data memory code protection is enabled
CP: Code Protection bit
1 = Program memory code protection is disabled
0 = Program memory code protection is enabled
MCLRE: MCLR/V
If LVP bit = 1:
If LVP bit = 0:
PWRTE: Power-up Timer Enable bit
1 = PWRT disabled
0 = PWRT enabled
WDTE<1:0>: Watchdog Timer Enable bit
11 = WDT enabled
10 = WDT enabled while running and disabled in Sleep
01 = WDT controlled by the SWDTEN bit in the WDTCON register
00 = WDT disabled
MCLRE
R/P-1
This bit is ignored.
1 = MCLR/V
0 = MCLR/V
This bit is ignored, CLKOUT function is disabled. Oscillator function on the CLKOUT pin.
1 = CLKOUT function is disabled. I/O function on the CLKOUT pin.
0 = CLKOUT function is enabled on the CLKOUT pin
CONFIGURATION WORD 1
WPUE3 bit.
bit 13
P = Programmable bit
‘1’ = Bit is set
PP
PP
PWRTE
FCMEN
PP
R/P-1
R/P-1
pin function is MCLR; Weak pull-up enabled.
pin function is digital input; MCLR internally disabled; Weak pull-up under control of
Pin Function Select bit
(2)
R/P-1
R/P-1
IESO
WDTE<1:0>
U = Unimplemented bit, read as ‘1’
-n = Value when blank or after Bulk Erase
CLKOUTEN
R/P-1
R/P-1
R/P-1
R/P-1
BOREN<1:0>
 2011 Microchip Technology Inc.
FOSC<2:0>
R/P-1
R/P-1
R/P-1/1
R/P-1
CPD
bit 8
bit 0