TMPM363F10FG Toshiba, TMPM363F10FG Datasheet - Page 645

• Manufacturer Part Number: TMPM363F10FG
• Manufacturer: Toshiba

Specifications of TMPM363F10FG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 100
• Package: LQFP(14x14)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 4
• Uart/sio (ch): 5
• Usb: Host
• Can: 1
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: 8
• 10-bit Ad Converter: 8
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: Y
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit

22. Analog / Digital Converter (ADC)
22.1
er is equipped with 8 analog input channel.
Note 1: To assure conversion accuracy, the specified value must be set to the ADCBAS register.
Note 2: If it is necessary to reduce a power current by operating the TMPM363F10FG in IDLE or STOP mode and if either
TMPM363F10FG has a 10-bit, sequential-conversion analog / digital converter (AD converter). This AD convert-
These 8 analog input channels (pins AIN0~AIN7) are also used as input / output ports.
Outline
case shown below is applicable, you must first stop the AD converter and then execute the instruction to put the
TMPM363F10FG into standby mode.
1.
2.
TheTMPM363F10FG must be put into IDLE mode when ADMOD1<I2AD> is "0".
The TMPM363F10FG must be put into STOP mode.
Page 619
TMPM363F10FG