zl50415 Zarlink Semiconductor, zl50415 Datasheet - Page 42

• Manufacturer Part Number: zl50415
• Description: Managed 16-port 10/100 M + 2-port 1 G Ethernet Switch
• Manufacturer: Zarlink Semiconductor

In unmanaged mode, the trunks are individually enabled/disabled by controlling pin trunk0,1,2.
9.0
9.1
The received or transmitted data of any 10/100 port in the ZL50418 chip can be “mirrored” to any other port. We
support two such mirrored source-destination pairs. A mirror port can not also serve as a data port.
9.2
MIRROR1_SRC: Sets the source port for the first port mirroring pair. Bits [4:0] select the source port to be mirrored.
An illegal port number is used to disable mirroring (which is the default setting). Bit [5] is used to select between
ingress (Rx) or egress (Tx) data.
MIRROR1_DEST: Sets the destination port for the first port mirroring pair. Bits [4:0] select the destination port to be
mirrored.
MIRROR2_SRC: Sets the source port for the second port mirroring pair. Bits [4:0] select the source port to be
mirrored. An illegal port number is used to disable mirroring (which is the default setting). Bit [5] is used to select
between ingress (Rx) or egress (Tx) data.
MIRROR2_DEST: Sets the destination port for the second port mirroring pair. Bits [4:0] select the destination port to
be mirrored. The default is port 0.
Refer to Port Mirroring Application Notes for further information.
Port Mirroring Features
Setting Registers for Port Mirroring
Port Mirroring
Group 1
Group 2
Table 13 - Select via trunk0_mode register
Table 14 - Select via trunk1_mode register
Table 15 - Unmanaged Mode




Port 4
Zarlink Semiconductor Inc.

Port 25(Giga 0)
ZL50418




42
Port 5



Port 6

Port 26 (Giga 1)


Port 7
Data Sheet