RG82845M Intel, RG82845M Datasheet - Page 122

• Manufacturer Part Number: RG82845M
• Description: Chipset Memory Controller Hub Mobile
• Manufacturer: Intel

Intel
5.4.
122
®
82845MP/82845MZ Chipset-Mobile (MCH-M)
MCH-M Retry/Disconnect Conditions
The MCH-M generates retry/disconnect according to the AGP Specification rules when being accessed
as a target by the AGP master using a FRAME# protocol cycle.
Delayed Transactions
When an AGP FRAME#-to-DRAM read cycle is retried by the MCH-M, it is processed internally as a
Delayed Transaction.
The MCH-M supports the Delayed Transaction mechanism on the AGP target interface for the
transactions issued using AGP FRAME# protocol. This mechanism is compatible with the PCI 2.1
Specification. The process of latching all information required to complete the transaction, terminating
with Retry, and completing the request without holding the master in wait-states is called a Delayed
Transaction. The MCH-M latches the Address and Command when establishing a Delayed Transaction.
The MCH-M generates a Delayed Transaction on the AGP only for AGP FRAME# to DRAM read
accesses. The MCH-M does not allow more than one Delayed Transaction access from AGP at any time.
Power and Thermal Management
An Intel 845MP/845MZ Chipset platform is compliant with the following specifications:
• Exclusive Access. MCH-M does not issue a locked cycle on the AGP bus on behalf of either the host
• Configuration Read and Write. Host Configuration cycles to AGP are forwarded as Type 1
• Fast Back-to-Back Transactions. MCH-M as an initiator does not perform fast back-to-back cycles.
• APM Rev 1.2
• ACPI Rev 1.0b
• ACPI Rev 2.0
• PCI Power Management Rev 1.0
• PC'99, Rev 1.0
• PC'99A
• PC’01, Rev 1.0
programmed address range are forwarded to the hub interface. MCH-M does not support I/O
accesses from the hub interface to AGP.
or the hub interface. The hub interface and host locked transactions to AGP are initiated as unlocked
transactions by the MCH-M on the AGP bus.
Configuration Cycles. MCH-M does not support configuration reads or writes from the hub
interface to AGP.
Datasheet
250687-002
R