ST92E163-EPB/US STMicroelectronics, ST92E163-EPB/US Datasheet - Page 128

• Manufacturer Part Number: ST92E163-EPB/US
• Description: KIT DEMO MASS STORAGE
• Manufacturer: STMicroelectronics
• Type: Microcontroller Programmerr

Specifications of ST92E163-EPB/US

• Contents: Programmer, Cable, Power Supply, Software, Manual and more
• For Use With/related Products: ST9 MCUs
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ST92163R4 - MULTIFUNCTION TIMER (MFT)
MULTIFUNCTION TIMER (Cont’d)
TIMER MODE REGISTER (TMR)
R249 - Read/Write
Register Page: 10
Reset value: 0000 0000 (00h)
Bit 7 = OE1: Output 1 enable.
0: Disable the Output 1 (TxOUTB pin) and force it
1: Enable the Output 1 (TxOUTB pin)
Bit 6 = OE0: Output 0 enable.
0: Disable the Output 0 (TxOUTA pin) and force it
1: Enable the Output 0 (TxOUTA pin).
Bit 5 = BM: Bivalue mode.
This bit works together with the RM1 and RM0 bits
to select the timer operating mode (see
0: Disable bivalue mode
1: Enable bivalue mode
Bit 4 = RM1: REG1R mode.
This bit works together with the BM and RM0 bits
to select the timer operating mode. Refer to
23.
Note: This bit has no effect when the Bivalue
Mode is enabled (BM=1).
128/230
OE1
high.
The relevant I/O bit must also be set to Alternate
Function
high
The relevant I/O bit must also be set to Alternate
Function
7
OE0
BM
RM1 RM0 ECK REN
Table
Table
C0
23).
0
Bit 3 = RM0: REG0R mode.
This bit works together with the BM and RM1 bits
to select the timer operating mode. Refer to
23.
Table 23. Timer Operating Modes
Bit 2 = ECK Timer clock control.
0: The prescaler clock source is selected depend-
1: Enter Parallel mode (for Timer 1 and Timer 3
Bit 1 = REN: Retrigger mode.
0: Enable retriggerable mode
1: Disable retriggerable mode
Bit 0 = CO: Continous/One shot mode.
0: Continuous mode (with autoreload on End of
1: One shot mode
BM RM1 RM0
1
1
0
0
0
0
ing on the IN0 - IN3 bits in the T_ICR register
only, no effect for Timer 0 and 2). See
8.2.2.12.
Count condition)
TMR Bits
x
x
0
1
0
1
0
1
0
0
1
1
Biload mode
Bicapture mode
Load from REG0R and Monitor on
REG1R
Load from REG0R and Capture on
REG1R
Capture on REG0R and Monitor on
REG1R
Capture on REG0R and REG1R
Timer Operating Modes
Section
Table