UPD70F3765GF-GAT-AX Renesas Electronics America, UPD70F3765GF-GAT-AX Datasheet - Page 1049

• Manufacturer Part Number: UPD70F3765GF-GAT-AX
• Description: MCU 32BIT V850ES/JX3-H 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Hr

Specifications of UPD70F3765GF-GAT-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 48MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3-H, V850ES/JH3-H
21.4 Cautions
R01UH0042EJ0400 Rev.4.00
Sep 30, 2010
(1) Clock accuracy
(2) Stopping the USB clock
To operate the USB function controller, the internal clock (6 MHz external clock × internal clock multiplied by 8 = 48
MHz internal clock) or external clock (external clock input to UCLK pin (f
clock. When the internal clock is used as the USB clock, use a resonator with an accuracy of 6 MHz ±500 ppm
(max.). When the external clock is used, apply a clock with an accuracy of 48 MHz ±500 ppm (max.) to the UCLK
pin. If the USB clock accuracy drops, the transmission data cannot satisfy the USB rating.
When the main clock (f
USB function controller, be sure to stop the USB function controller (by setting bits 1 and 0 of the UFCKMSK
register to 1) first before stopping the main clock (f
If the main clock (f
noise in the clock pulse when the main clock (f
Similarly, when an external clock whose signal is input from the EXCLK pin is selected as the USB function
controller clock, measures must be taken to prevent noise from being generated in the clock pulse by the external
circuit. If this is not feasible, then the USB function controller must be stopped first before stopping the main clock
(f
XX
).
XX
) is stopped without first stopping the USB function controller, a malfunction might occur due to
XX
) has been selected as the USB function controller clock and it is necessary to stop the
XX
) is restarted.
CHAPTER 21 USB FUNCTION CONTROLLER (USBF)
XX
).
USB
= 48 MHz)) must be used as the USB
Page 1049 of 1509