WM8986GECO/V Wolfson Microelectronics, WM8986GECO/V Datasheet - Page 43

• Manufacturer Part Number: WM8986GECO/V
• Description: Audio Amplifiers Class D Headphone DAC + Line Out
• Manufacturer: Wolfson Microelectronics

Specifications of WM8986GECO/V

• Product: Class-D
• Output Power: 40 mW
• Thd Plus Noise: - 86 dB
• Operating Supply Voltage: 1.71 V to 3.6 V, 2.5 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Audio Load Resistance: 16 Ohms
• Minimum Operating Temperature: - 40 C
• Output Signal Type: Differential
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 1.71 V, 2.5 V
• Output Type: Differential
• Package / Case: QFN-28
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Production Data
w
CLASS D / CLASS AB HEADPHONE OUTPUTS (LOUT2 AND ROUT2)
The outputs LOUT2 and ROUT2 are designed to drive two headphone loads of 16Ω or 32Ω or line
outputs (See Headphone Output and Line Output sections, respectively). Each output has an
individual volume control PGA, a mute and an enable control bit as shown in Figure 23. LOUT2 and
ROUT2 output the left and right channel mixer outputs respectively.
Table 24 Class D Control Registers
When driving headphones using class D outputs it is necessary to use appropriate filtering, placed
close to the device, to minimise EMI emissions from the headphone cable (Refer to "Applications
Information" for more information). This filtering does not prevent class AB mode operation.
Figure 23 LOUT2 and ROUT2 Class D Headphone Configuration
R7 (07h)
R23 (17h)
REGISTER
ADDRESS
7:4
8
BIT
DCLKDIV
CLASSDEN
LABEL
DEFAULT
1000
0
Controls clock division from
SYSCLK to generate suitable class
D clock.
Recommended class D clock
frequency = 1.4MHz.
0000 = divide by 1
0010 = divide by 2
0011 = divide by 3
0100 = divide by 4
0101 = divide by 5.5
0110 = divide by 6
1000 = divide by 8
1001 = divide by 12
1010 = divide by 16
Enable signal for class D mode on
LOUT2 and ROUT2
0 = Class AB mode
1 = Class D mode
DESCRIPTION
PD, Rev 4.1, June 2009
WM8986
43