NH82801HBM S LB9A Intel, NH82801HBM S LB9A Datasheet - Page 469

• Manufacturer Part Number: NH82801HBM S LB9A
• Description: CONTROLLER HUB, ICH8M, I/O, 82801HBM
• Manufacturer: Intel

Specifications of NH82801HBM S LB9A

• Power Dissipation Pd: 2.4W
• Digital Ic Case Style: BGA
• No. Of Pins: 676
• Pci Bus Type: I/O Controller Hub
• Pci Express Base Spec: PCIe 1.1
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SATA Controller Registers (D31:F2)
12.1.6
12.1.6.1
12.1.6.2
Intel
®
ICH8 Family Datasheet
PI—Programming Interface Register (SATA–D31:F2)
When Sub Class Code Register (D31:F2:Offset 0Ah) = 01h
Address Offset: 09h
Default Value:
When Sub Class Code Register (D31:F2:Offset 0Ah) = 04h
Address Offset: 09h
Default Value:
6:4
7:0
Bit
Bit
7
3
2
1
0
This read-only bit is a 1 to indicate that the ICH8 supports bus master operation
Reserved. Will always return 0.
Secondary Mode Native Capable (SNC) — RO.
0 = Secondary controller only supports legacy mode.
1 = Secondary controller supports both legacy and native modes.
When MAP.MV (D31:F2:Offset 90:bits 1:0) is any value other than 00b, this bit reports
as a 0. When MAP.MV is 00b, this bit reports as a 1.
Secondary Mode Native Enable (SNE) — R/W / RO.
Determines the mode that the secondary channel is operating in.
0 = Secondary controller operating in legacy (compatibility) mode
1 = Secondary controller operating in native PCI mode.
When MAP.MV (D31:F2:Offset 90:bits 1:0) is any value other than 00b, this bit is read-
only (RO). Software is responsible for clearing this bit before entering combined mode.
When MAP.MV is 00b, this bit is read/write (R/W).
If this bit is set by software, then the PNE bit (bit 0 of this register) must also be set by
software. While in theory these bits can be programmed separately, such a
configuration is not supported by hardware.
Primary Mode Native Capable (PNC) — RO.
0 = Primary controller only supports legacy mode.
1 = Primary controller supports both legacy and native modes.
When MAP.MV (D31:F2:Offset 90:bits 1:0) is any value other than 00b, this bit reports
as a 0. When MAP.MV is 00b, this bit reports as a 1
Primary Mode Native Enable (PNE) — R/W / RO.
Determines the mode that the primary channel is operating in.
0 = Primary controller operating in legacy (compatibility) mode.
1 = Primary controller operating in native PCI mode.
When MAP.MV (D31:F2:Offset 90:bits 1:0) is any value other than 00b, this bit is read-
only (RO). Software is responsible for clearing this bit before entering combined mode.
When MAP.MV is 00b, this bit is read/write (R/W).
If this bit is set by software, then the SNE bit (bit 2 of this register) must also be set by
software. While in theory these bits can be programmed separately, such a
configuration is not supported by hardware.
Interface (IF) — RO.
When configured as RAID, this register becomes read only 0.
See bit description
00h
Description
Description
Attribute:
Size:
Attribute:
Size:
R/W, RO
8 bits
RO
8 bits
469