A3PE-BRD600-SKT Actel, A3PE-BRD600-SKT Datasheet - Page 62

• Manufacturer Part Number: A3PE-BRD600-SKT
• Description: MCU, MPU & DSP Development Tools ProASIC3/E Starter Kit
• Manufacturer: Actel

Specifications of A3PE-BRD600-SKT

• Processor To Be Evaluated: ProASIC3/E
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Quick Start Tutorial
Selecting an Action
Programming the Device
62
After loading the STAPL file, select an action from the Action list. See
To program the device:
1.
QUERY_SECURITY
ERASE
READ_IDCODE
VERIFY
PROGRAM
DEVICE_INFO
ERASE_FROM
PROGRAM_FROM
VERIFY_FROM
PROGRAM_ARRAY
ERASE_ARRAY
VERIFY_ARRAY
PROGRAM
ERASE_ALL
ACTION_VERIFY
READ_IDCODE
ENC_DATA_AUTHENTICATION
PROGRAM_SECURITY
DEVICE_INFO
In the Action list, select PROGRAM.
Option
Checks the security status of the device. If the device is programmed with
the security key, then this command returns with Read inhibit:1, Write
inhibit:1. If the security key is not present, the values are Read inhibit:0,
Write inhibit:0.
Erases the device.
Reads the device ID code.
Verifies if the device is programmed with the loaded STAPL file. Can be
used to ensure that the bitstream programmed in the device is the same as
the original STAPL file. If the wrong STAPL file is loaded, Exit 11
appears in the log window. A successful operation results in Exit 0.
Programs the device.
Displays the serial number of the device, the Design Name that is
programmed into the device, and the checksum that is programmed into
the device.
Erases FlashROM only.
Programs FlashROM only.
Verifies FlashROM only.
Programs the FPGA Array only.
Erases the FPGA Array only.
Verifies the FPGA Array only.
Programs FPGA Array, FlashROM and/or security settings of the device.
Erases FPGA Array, FlashROM and/or security settings of the device.
Verifies FPGA Array, FlashROM and/or security settings of the device.
Reads the device ID code.
Authenticates the encrypted data against the security settings you
previously programmed into the device. This is a preventative measure that
stops the program from corrupting data into the device.
Programs security settings into the device.
Displays the Device IDCODE, security settings, design name, checksum,
and FlashROM content that is programmed into the device.
Table 7-1 · Action Options
ProASIC3/E Starter Kit User’s Guide and Tutorial
Table 7-1
Action
for a definition of each action.