A3PE-BRD600-SKT Actel, A3PE-BRD600-SKT Datasheet - Page 63

• Manufacturer Part Number: A3PE-BRD600-SKT
• Description: MCU, MPU & DSP Development Tools ProASIC3/E Starter Kit
• Manufacturer: Actel

Specifications of A3PE-BRD600-SKT

• Processor To Be Evaluated: ProASIC3/E
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Verifying the Correct Programming
ProASIC3/E Starter Kit User’s Guide and Tutorial
2.
3.
4.
5.
Note:
Note:
To verify the device is programmed with the correct STAPL file:
1.
2.
In the Device list, select the A3P250 device (or A3PE600 if your board has an A3PE600 device).
Click the Execute button in the toolbar.
The Execute Action dialog box appears, as shown in
All the steps of the programming sequence are listed. Grayed out options are required for programming and cannot
be changed. All of these steps, as shown in
and cannot be changed.
Click Execute to start programming. The progress of the programming action displays in the Log window. The
message 'Exit 0' indicates that the device has successfully been programmed, as shown in
Load the STAPL file.
In the Action list, click Verify.
Do not interrupt the programming sequence, it may damage the device or programmer. If you encounter any
failures, refer to the troubleshooting section of the FlashPro User’s
If you have an A3PE600 device on board, you will see A3PE600 in the Device list.
Figure 7-45. Execute Action Dialog Box—Program
Figure 7-46. Successfully Programmed Device
Figure
7-45, are grayed out because they are required for programming
Figure
7-45.
Guide.
Step 8 – Program the Device
Figure
7-46.
63