MPC8349ECVVAGDB Freescale Semiconductor, MPC8349ECVVAGDB Datasheet - Page 79

• Manufacturer Part Number: MPC8349ECVVAGDB
• Description: IC MPU POWERQUICC II 672-TBGA
• Manufacturer: Freescale Semiconductor

Specifications of MPC8349ECVVAGDB

• Processor Type: MPC83xx PowerQUICC II Pro 32-Bit
• Speed: 400MHz
• Voltage: 1.2V
• Mounting Type: Surface Mount
• Package / Case: 672-TBGA
• For Use With: MPC8349E-MITX-GP - KIT REFERENCE PLATFORM MPC8349EMPC8349E-MITXE - BOARD REFERENCE FOR MPC8349MPC8349EA-MDS-PB - KIT MODULAR DEV SYSTEM MPC8349E
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -

20.3
When heat sinks are attached, an interface material is required, preferably thermal grease and a spring clip.
The spring clip should connect to the printed-circuit board, either to the board itself, to hooks soldered to
the board, or to a plastic stiffener. Avoid attachment forces that can lift the edge of the package or peel the
package from the board. Such peeling forces reduce the solder joint lifetime of the package. The
recommended maximum force on the top of the package is 10 lb force (4.5 kg force). Any adhesive
attachment should attach to painted or plastic surfaces, and its performance should be verified under the
application requirements.
20.3.1
When a heat sink is used, the junction temperature is determined from a thermocouple inserted at the
interface between the case of the package and the interface material. A clearance slot or hole is normally
required in the heat sink. Minimize the size of the clearance to minimize the change in thermal
performance caused by removing part of the thermal interface to the heat sink. Because of the experimental
difficulties with this technique, many engineers measure the heat sink temperature and then back calculate
the case temperature using a separate measurement of the thermal resistance of the interface. From this
case temperature, the junction temperature is determined from the junction-to-case thermal resistance.
where:
21 System Design Information
This section provides electrical and thermal design recommendations for successful application of the
MPC8349EA.
21.1
The MPC8349EA includes two PLLs:
Freescale Semiconductor
1. The platform PLL generates the platform clock from the externally supplied CLKIN input. The
The Bergquist Company
18930 West 78th St.
Chanhassen, MN 55317
Internet: www.bergquistcompany.com
T
T
R
P
frequency ratio between the platform and CLKIN is selected using the platform PLL ratio
configuration bits as described in
J
C
θ
D
Heat Sink Attachment
System Clocking
JC
= junction temperature (°C)
= case temperature of the package (°C)
= power dissipation (W)
MPC8349EA PowerQUICC II Pro Integrated Host Processor Hardware Specifications, Rev. 12
Experimental Determination of the Junction Temperature with a
Heat Sink
= junction-to-case thermal resistance (°C/W)
T
J
= T
C
+ (R
θ
JC
× P
Section 19.1, “System PLL Configuration.”
D
)
800-347-4572
System Design Information
79