S29GL256P10FFI022 Spansion, S29GL256P10FFI022 Datasheet - Page 53

• Manufacturer Part Number: S29GL256P10FFI022
• Description: Flash 256M, 3V, 110ns Parallel NOR Flash
• Manufacturer: Spansion

Specifications of S29GL256P10FFI022

• Rohs: yes
• Data Bus Width: 16 bit
• Memory Type: NOR Flash
• Memory Size: 256 Mbit
• Architecture: Uniform
• Timing Type: Asynchronous
• Interface Type: CFI
• Access Time: 100 ns
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 2.7 V
• Maximum Operating Current: 110 mA
• Operating Temperature: - 40 C to + 85 C
• Mounting Style: SMD/SMT
• Package / Case: FBGA-64
• Organization: 128 KB x 1024

11. Electrical Specifications
11.1
October 22, 2012 S29GL-P_00_A14
Absolute Maximum Ratings
Notes
1. Minimum DC voltage on input or I/Os is –0.5 V. During voltage transitions, inputs or I/Os may undershoot V
2. Minimum DC input voltage on pins A9 and ACC is -0.5V. During voltage transitions, A9 and ACC may overshoot V
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
4. Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only;
Description
Storage Temperature, Plastic Packages
Ambient Temperature with Power Applied
Voltage with Respect to Ground
Output Short Circuit Current (Note 3)
to 20 ns. See
V
of up to 20 ns. See
ns.
functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is not
implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.
CC
+ 2.0 V for periods up to 20 ns. See
Figure
Figure
11.1. Maximum DC voltage on input or I/Os is V
11.1. Maximum DC voltage on pins A9 and ACC is +12.5 V, which may overshoot to 14.0 V for periods up to 20
D a t a
+0 .8 V
+2.0 V
+0.5 V
+2.0 V
–0 .5 V
–2 .0 V
Figure 11.1 Maximum Negative Overshoot Waveform
Figure 11.2 Maximum Positive Overshoot Waveform
V
V
S29GL-P MirrorBit
CC
CC
Figure
S h e e t
11.2.
All Inputs and I/Os except as noted below
(Note 1)
V
V
A9 and ACC (Note 2)
CC
IO
20 ns
20 ns
(Note 1)
®
Flash Family
CC
20 n s
20 ns
+ 0.5 V. During voltage transitions inputs or I/Os may overshoot to
20 ns
20 ns
SS
–0.5 V to V
–0.5 V to +12.5 V
to –2.0 V for periods of up
–65°C to +150°C
–65°C to +125°C
–0.5 V to +4.0 V
–0.5V to +4.0V
SS
200 mA
Rating
to –2.0 V for periods
CC
+ 0.5 V
53