DSPIC30F1010-30I/SO Microchip Technology, DSPIC30F1010-30I/SO Datasheet - Page 168

• Manufacturer Part Number: DSPIC30F1010-30I/SO
• Description: IC DSPIC MCU/DSP 6K 28SOIC
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F1010-30I/SO

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 6KB (2K x 24)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Data Bus Width: 16 bit
• Processor Series: DSPIC30F
• Core: dsPIC
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240002, DM300023, DM330011
• Package: 28SOIC W
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 30 MHz
• Operating Supply Voltage: 3.3|5 V
• Number Of Programmable I/os: 21
• Interface Type: I2C/SPI/UART
• On-chip Adc: 6-chx10-bit
• Number Of Timers: 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM300023 - KIT DEMO DSPICDEM SMPS BUCKDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

dsPIC30F1010/202X
REGISTER 15-2:
DS70178C-page 166
bit 15
bit 7
Legend: U = Unimplemented bit, read as ‘0’
R = Readable bit
-n = Value at POR
bit 15, 13
bit 14
bit 12
bit 11
bit 10
bit 9
bit 8
bit 7-6
bit 5
URXISEL1
UTXISEL1
R/W-0
R/W-0
UTXISEL1:UTXISEL0: Transmission Interrupt Mode Selection bits
11 =Reserved; do not use
10 =Interrupt when a character is transferred to the Transmit Shift Register and as a result, the
01 =Interrupt when the last character is shifted out of the Transmit Shift Register; all transmit
00 =Interrupt when a character is transferred to the Transmit Shift Register (this implies there is at
UTXINV: IrDA Encoder Transmit Polarity Inversion bit
1 = IrDA encoded U1TX idle state is ‘1’
0 = IrDA encoded U1TX idle state is ‘0’
Unimplemented: Read as ‘0’
UTXBRK: Transmit Break bit
1 = Send Sync Break on next transmission – Start bit, followed by twelve ‘0’ bits, followed by Stop bit;
0 = Sync Break transmission disabled or completed
UTXEN: Transmit Enable bit
1 = Transmit enabled, U1TX pin controlled by UART1
0 = Transmit disabled, any pending transmission is aborted and buffer is reset. U1TX pin controlled by
UTXBF: Transmit Buffer Full Status bit (Read-Only)
1 = Transmit buffer is full
0 = Transmit buffer is not full, at least one more character can be written
TRMT: Transmit Shift Register Empty bit (Read-Only)
1 = Transmit Shift Register is empty and transmit buffer is empty (the last transmission has
0 = Transmit Shift Register is not empty, a transmission is in progress or queued
URXISEL1:URXISEL0: Receive Interrupt Mode Selection bits
11 =Interrupt is set on RSR transfer, making the receive buffer full (i.e., has 4 data characters)
10 =Interrupt is set on RSR transfer, making the receive buffer 3/4 full (i.e., has 3 data characters)
0x =Interrupt is set when any character is received and transferred from the RSR to the receive buffer.
ADDEN: Address Character Detect bit (bit 8 of received data = 1)
1 = Address Detect mode enabled. If 9-bit mode is not selected, this does not take effect.
0 = Address Detect mode disabled
URXISEL0
UTXINV
Note 1: Value of bit only affects the transmit properties of the module when the IrDA encoder is
R/W-0
R/W-0
least one character open in the transmit buffer)
cleared by hardware upon completion
PORT.
completed)
Receive buffer has one or more characters.
transmit buffer becomes empty
operations are completed
U1STA: UART1 STATUS AND CONTROL REGISTER
(1)
enabled (IREN = 1).
W = Writable bit
‘1’ = Bit is set
UTXISEL0
ADDEN
R/W-0
R/W-0
RIDLE
R/W-0
U-0
—
Preliminary
HS =Hardware Set
‘0’ = Bit is cleared
UTXBRK
R/W-0
R/W-0
PERR
(1)
UTXEN
R/W-0
R/W-0
FERR
© 2006 Microchip Technology Inc.
HC = Hardware Cleared
x = Bit is unknown
UTXBF
R/W-0
R/W-0
OERR
URXDA
R/W-0
TRMT
R/W-0
bit 8
bit 0