DF2378BVFQ35WV Renesas Electronics America, DF2378BVFQ35WV Datasheet - Page 390

• Manufacturer Part Number: DF2378BVFQ35WV
• Description: IC H8S/2378 MCU FLASH 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2378BVFQ35WV

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 35MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 97
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 6x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-QFP
• For Use With: EDK2378 - DEV EVAL KIT FOR H8S/2378
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 7 DMA Controller (DMAC)
Rev.7.00 Mar. 18, 2009 page 322 of 1136
REJ09B0109-0700
Figure 7.10 Example of Single Address Mode Setting Procedure (When Sequential Mode Is
Set transfer source and
Set number of transfers
Single address mode
transfer destination
Read DMABCRL
Set DMABCRH
Single address
Set DMABCRL
mode setting
Set DMACR
addresses
[1]
[2]
[3]
[4]
[5]
[6]
[1] Set each bit in DMABCRH.
[2] Set the transfer source address/transfer
[3] Set the number of transfers in ETCR.
[4] Set each bit in DMACR.
[5] Read the DTE bit in DMABCRL as 0.
[6] Set each bit in DMABCRL.
Specified)
• Set the DTE bit to 1 to enable transfer.
• Clear the FAE bit to 0 to select short address
• Set the SAE bit to 1 to select single address
• Specify enabling or disabling of internal
destination address in MAR.
• Set the transfer data size with the DTSZ bit.
• Specify whether MAR is to be incremented or
• Clear the RPE bit to 0 to select sequential
• Specify the transfer direction with the DTDIR
• Select the activation source with bits DTF3 to
• Specify enabling or disabling of transfer end
mode.
mode.
interrupt clearing with the DTA bit.
decremented with the DTID bit.
mode.
bit.
DTF0.
interrupts with the DTIE bit.