HD6417708SF60V Renesas Electronics America, HD6417708SF60V Datasheet - Page 356

• Manufacturer Part Number: HD6417708SF60V
• Description: IC SUPERH MPU ROMLESS 208LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417708SF60V

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 60MHz
• Connectivity: EBI/EMI, SCI, SmartCard
• Peripherals: POR, WDT
• Number Of I /o: 8
• Program Memory Type: ROMless
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 208-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Ram Size: -
• Program Memory Size: -
• Data Converters: -

12.3.4
Figure 12.4 shows how to use the alarm function.
Alarms can be generated using seconds, minutes, hours, day of the week, date, month, or any
combination of these. Set the ENB bit (bit 7) in the register on which the alarm is placed to 1, and
then set the alarm time in the lower bits. Clear the ENB bit in the register on which the alarm is
placed to 0.
When the clock and alarm times match, a 1 is set in the AF bit (bit 0) in RCR1. Alarm detection
can be checked by reading this bit, but normally it is done by interrupt. If 1 is placed in the AIE bit
(bit 3) in RCR1, an interrupt is generated when an alarm occurs.
336
Alarm Function
Clear alarm interrupt
(wait for interrupt or
Monitor alarm time
Set alarm interrupt
check alarm flag)
Clear alarm flag
Set alarm time
Clock running
Figure 12.4 Using the Alarm Function
Temporarily disable interrupts (clear AIE bit
in RCR1 register to 0) to prevent erroneous
interruption
When interrupts are used, enable interrupts
(set AIE bit in RCR1 register to 1)
Flag must be reset (by clearing AF bit in RCR1
register to 0) since it was set during alarm
time setting