UPD70F3735GK-GAK-AX Renesas Electronics America, UPD70F3735GK-GAK-AX Datasheet - Page 456

• Manufacturer Part Number: UPD70F3735GK-GAK-AX
• Description: MCU 32BIT V850ES/JX3-L 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3735GK-GAK-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 66
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 8x10b, D/A 1x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JF3-L
15.5 Interrupt Request Signals
transmission enable interrupt request signal.
R01UH0017EJ0400 Rev.4.00
Sep 30, 2010
The following two interrupt request signals are generated from UARTAn.
• Reception complete interrupt request signal (INTUAnR)
• Transmission enable interrupt request signal (INTUAnT)
The default priority for these two interrupt request signals is reception complete interrupt request signal then
(1) Reception complete interrupt request signal (INTUAnR)
(2) Transmission enable interrupt request signal (INTUAnT)
A reception complete interrupt request signal is output when data is shifted into the receive shift register and
transferred to the UAnRX register in the reception enabled status.
A reception complete interrupt request signal is also output when a reception error occurs. Therefore, when a
reception complete interrupt request signal is acknowledged and the data is read, read the UAnSTR register and
check that the reception result is not an error.
No reception complete interrupt request signal is generated in the reception disabled status.
If transmit data is transferred from the UAnTX register to the UARTAn transmit shift register with transmission
enabled, the transmission enable interrupt request signal is generated.
Table 15-2. Interrupts and Their Default Priorities
Reception complete
Transmission enable
CHAPTER 15 ASYNCHRONOUS SERIAL INTERFACE A (UARTA)
Interrupt
Priority
High
Low
Page 440 of 816