UPD70F3735GK-GAK-AX Renesas Electronics America, UPD70F3735GK-GAK-AX Datasheet - Page 659

• Manufacturer Part Number: UPD70F3735GK-GAK-AX
• Description: MCU 32BIT V850ES/JX3-L 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3735GK-GAK-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 66
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 8x10b, D/A 1x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JF3-L
19.6 External Interrupt Request Input Pins (NMI and INTP0 to INTP7)
19.6.1 Noise elimination
19.6.2 Edge detection
a valid edge is enabled by using the INTF0 and INTR0 register (the NMI pin functions as a normal port pin).
R01UH0017EJ0400 Rev.4.00
Sep 30, 2010
(1) Eliminating noise on NMI pin
(2) Eliminating noise on INTP0 to INTP7 pins
The valid edge of each of the NMI and INTP0 to INTP7 pins can be selected from the following four.
• Rising edge
• Falling edge
• Both rising and falling edges
• No edge detected
The edge of the NMI pin is not detected after reset. Therefore, the interrupt request signal is not acknowledged unless
The NMI pin has an internal noise elimination circuit that uses analog delay. Therefore, the input level of the NMI
pin is not detected as an edge unless it is maintained for a specific time or longer. Therefore, an edge is detected
after specific time.
The NMI pin can be used to release the STOP mode. In the STOP mode, noise is not eliminated by using the
system clock because the internal system clock is stopped.
The INTP0 to INTP7 pins have an internal noise elimination circuit that uses analog delay. Therefore, the input
level of the NMI pin is not detected as an edge unless it is maintained for a specific time or longer. Therefore, an
edge is detected after specific time.
CHAPTER 19 INTERRUPT/EXCEPTION PROCESSING FUNCTION
Page 643 of 816