UPD70F3735GK-GAK-AX Renesas Electronics America, UPD70F3735GK-GAK-AX Datasheet - Page 763

• Manufacturer Part Number: UPD70F3735GK-GAK-AX
• Description: MCU 32BIT V850ES/JX3-L 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3735GK-GAK-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 66
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 8x10b, D/A 1x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JF3-L
R01UH0017EJ0400 Rev.4.00
Sep 30, 2010
(4) Securement of area for debug monitor program
The shaded portions in Figure 29-4 are the areas where the debug monitor program is allocated. The monitor
program performs initialization processing for debug communication interface and RUN or break processing for the
CPU. The internal ROM area must be filled with 0xFF. This area must not be rewritten by the user program.
[How to secure areas]
It is not necessarily required to secure this area if the user program does not use this area.
To avoid problems that may occur during the debugger startup, however, it is recommended to secure this area in
advance, using the compiler.
The following shows examples for securing the area, using the Renesas Electronics compiler CA850. Add the
assemble source file and link directive code, as shown below.
• Assemble source (Add the following code as an assemble source file.)
• Link directive (Add the following code to the link directive file.)
-- Secures 2 KB space for monitor ROM section
.section "MonitorROM", const
.space
-- Secures interrupt vector for debugging
.section "DBG0"
.space
-- Secures interrupt vector for serial communication
-- Change the section name according to the serial communication mode used
.section "INTCB0R"
.space
-- Secures 16-byte space for monitor RAM section
.section "MonitorRAM", bss
.lcomm
MROMSEG
};
MRAMSEG
};
The following shows an example when the internal ROM has 256 KB (end address is 003FFFFH) and internal
RAM has 16 KB (end address is 3FFEFFFH).
0x800, 0xff
4, 0xff
4, 0xff
monitorramsym, 16, 4
: !LOAD ?R V0x03f800{
MonitorROM
: !LOAD ?RW V0x03ffeff0{
MonitorRAM
= $PROGBITS
= $NOBITS
-- defines symbol monitorramsym
?A MonitorROM;
?AW MonitorRAM;
CHAPTER 29 ON-CHIP DEBUG FUNCTION
Page 747 of 816